Help with calc_pids.txt file...willing to paypal money

[exploder]

I recently had a hardrive crash and lost all of my efi calc pids and everything else. In doing so I have gone back and found the equations and whatnot for what was missing. I reinstalled efi live and then went to the calc_pids.txt file and added what I needed. I am attaching a copy of the file that I resaved here below. I then went into the scanner and tried to start selecting the parameters that should have been enabled by the calc files and now I can't find several of them for example (gm.cylair.dma, gmdyncylair.dma etc.) What have I done wrong and is there anyone that can send me a copy of their .txt file to copy and retry. What did I do wrong. I am willing to pay somebody for their help just send me your paypal addy.

[exploder]

Ok I found everything now except I cannot select the GM.DYNAIRTMP_DMA it wont let me select it and it wont let me right click and see why it doesn't work. Any ideas?

[mr.prick]

Did you validate all PIDs after re-installing the software?

[exploder]

How do I do that exactly? I don't remember doing that.

[mr.prick]

After you're connected to the vehicle Shift+F2

[WeathermanShawn]

Mr. Prick, whats your PAYPAL #... Just joking of course.

OP that has reminded me to always keep a back-up of all my files on another computer. Nothing like everything crashing on ya..

Hope you get everything straightened out.

[joecar]

Also do this (open it in Notepad):
- under Units, delete the non-text characters from the "flt" line (they look like rectangles).
- where CLC-00-013 is defined, remove non-text characters.
- at the end of the file, add two blank lines.

[exploder]

thanks joecar I think that fixed it. whats your paypal and how much do you want?

[joecar]

Exploder,

Also note that Shawn and I have new/better VE equations for CLC-00-003:

*CLC-00-003
%                  0.0         100.0      .2   "{SAE.MAF.gps}*({GM.DYNAIRTMP_DMA.C}+273.15)*3445.2/(5.669*{SAE.RPM}*{SAE.MAP.kPa})*{CALC.LTFTBEN}"
VE                 0.0           3.0      .4   "{SAE.MAF.gps}*({GM.DYNAIRTMP_DMA.C}+273.15)*15/({SAE.RPM}*{SAE.MAP.kPa})*{CALC.LTFTBEN}"

You will have to change the displacement from 5.669 to 6.800 (i.e. 415ci --> 6.8L) since your sig says 415ci.

[joecar]

thanks joecar I think that fixed it. whats your paypal and how much do you want?

Thanks, but not necessary... ...I have an unfair advantage, I play with calc_pids.txt almost every day...