Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: HSV with imbedded security no start?

  1. #1
    Senior Member
    Join Date
    Oct 2006
    Posts
    148

    Default HSV with imbedded security no start?

    Hi all, just wondering if anyone has had trouble getting an HSV with imbedded security to run with a Road Runner?

    We had one in last week (2004 clubsport) and could not get it to start, turned of the vats and tried programming the RR a few times but no go, put it down to the HSV imbedded security but just want to see if anyone else has had this happen or if it was just something I missed and nothing to do with the security? Thanks.

  2. #2
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    Change G1201 to None. It can be changed back to Class-2 using real time update when the vehicle is running I've found.
    Andrew
    EFILive Crew


  3. #3
    Senior Member
    Join Date
    Oct 2006
    Posts
    148

    Default

    Hi Andrew,
    Yes we tuned that off and still no run! we have never had a problem with any other Holden but this was the first HSV we have done with the road runner.. Cant work out how it would effect it but its all I could think of!!! When I get a free moment I will look at Holden SIP to see how the imbedded security works..

  4. #4
    Senior Member
    Join Date
    Oct 2006
    Posts
    148

    Default

    Just found this on SIP, it does not really say much on how the system works and by the sounds if I have the correct key it should not really stop the car from starting. But the “interrupts essential circuits” is interesting!


    "The new HSV Embedded Security System (ESS) is fitted as standard equipment to all HSV VTII, WH and VY models. The ESS is a micro-processor controlled immobilizer which automatically interrupts essential circuits when in “armed mode” The ESS stores the BCM’s security code and when the car is started it reads this code from the SCI bus. If this code is different from the stored one the ESS enters armed mode and prevents the vehicle from starting"


    Would like to here from any one that has had trouble with the RR on HSV vehicles to see if im not the only one!

  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Blacky on here has one in he's VTII GTS, pretty sure he just turns the Theft to None. BTW, I got to drive he's car with the 'HSV Embedded Security System (ESS)' , If it were mine, that system would be in the bin! what a pain.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #6
    Senior Member
    Join Date
    Oct 2006
    Posts
    148

    Default

    Had a few more HSV Holden’s in over the last few months, the road runner will work with VX HSV but have had 4 VY HSV and it will not run on them, surely im not the only one that this is happening to!! Has anyone found a way around this?

  7. #7
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Can't say it's a problem anyone has contacted me about.
    There is little detail on how the system works. If it's anything like the VTII you need to press the disarm button everytime right?
    I no longer monitor the forum, please either post your question or create a support ticket.

  8. #8
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195

    Default

    where does a car thief hide in New Zealand?

  9. #9
    Senior Member
    Join Date
    Oct 2006
    Posts
    148

    Default

    There is little detail on how the system works. If it's anything like the VTII you need to press the disarm button everytime right?
    No it will operate just like a normal key, its just an extra module under the center of the dash that adds more security than the BCM alone, I think you will find that if you have had one that you have to press the unlock button every time that it has had an after market alarm fitted.

  10. #10
    Lifetime Member JezzaB's Avatar
    Join Date
    Nov 2006
    Posts
    246

    Default

    Quote Originally Posted by rally1 View Post
    Had a few more HSV Holden’s in over the last few months, the road runner will work with VX HSV but have had 4 VY HSV and it will not run on them, surely im not the only one that this is happening to!! Has anyone found a way around this?
    I havent had any problems with the RR and the HSV cars:

    VY GTS
    VY GTO x 2
    VY Clubsport x 2
    VX GTS
    VX GTO x 2
    VX Grange
    VX Clubsport
    VT Senator x 3

    I usually just turn off VATS in the tune when im working on it and the RR is in.

    Jez

Page 1 of 2 12 LastLast

Similar Threads

  1. Persistent security light
    By vortecfcar in forum RoadRunner Real-Time PCM Emulator
    Replies: 17
    Last Post: April 8th, 2012, 08:59 AM
  2. LMM security patch
    By killerbee in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 4
    Last Post: May 16th, 2010, 11:38 AM
  3. Code U1000 Security Light on No start. HELP!!!
    By ls698ta in forum Gen III V8 Specific
    Replies: 7
    Last Post: February 14th, 2009, 10:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •