I just happened on this and I am confused

I was logging in the scan tool doing the Auto VE, b0101 Main VE Table-PLX Wideband BEN (average) which I believe is RPM vs MAP in KPA.
When I opened the tuning tool while at idle the scan tool was was logging MAP at the 50-60 range @ 800-1200 RPM. The tuning tool was showing MAP at 15-20 range @ 800-1200 RPM.
That seems wrong Like it is logging in the wrong area so when I paste the scan tool log to the VE table it would be wrong? I have been doing the VE over and over and it seems like it is not getting closer......