Hi, new at this so please help..
I have been having a problem with the RR seting up the Ve table (autove i think you call it)
at the 60 kpa/800rpm mark it is listing the cell at over 108. yet everythinn around it is fine (seems fine)
I have attached the Bin file that i set up useing the autoVe tut.. as well the log file from this morning...
Also note at idle in gear the afr is running at 20. when commanded is in the 14's...
Any help woould be greatly appreciated..
Am i seting the bin file up wrong for the RR ???
The cars speck's
ls1 2002 serII SS commodore / Mafless
built Automatic
Dart 225 heads
Comp cam 232/234 112lsa
Otrcai
Pacemaker try's and twin 2.5 inch eaxhuast
4200 stall
Shane