FlashScan button response super sensitive

[ls197gmc]

after upgrading all the firmware, copying *. files and getting all that working so i can see the WB, the buttons on the FlashScan are super sensitive. It seems to count as double (some times triple) press. Is this a known issue or am i experiencing something new?

[jimter]

Ckeck out http://forum.efilive.com/showpost.ph...74&postcount=1
Read #3

[ls197gmc]

I've done that power cycle (removing USB and pluging it back in). It still has the same issue. Anyone have any ideas?

[jimter]

I would try to reformat the config area, then cycle power, then recopy the config files, makeing sure your dont copy settings.dat (if you have it) from your computer.

[ls197gmc]

that did it! format the config area, copied ONLY the *.pmm files, power cycled the FlashScan, it works correctly now! (well at least that part of it, for now!) thanks a bunch!

[jimter]

You also need to copy options.ini and switch.ini so you can select your engine type and have the option to switch dsp5 tunes (when available)

[ls197gmc]

i found the options.ini file, where do i find the the switch.ini file?

[ChipsByAl]

C:\Program Files\EFILive\V8\EFILive_Hapi\Config

It should be in the same folder as the options.ini file