BB Logging beta update: March 26, 2008

[Blacky]

but I still don't see the invalid calc pids nor the predefined wideband calc pids.

Its not just a case of one computer has the "Supported" check box checked and the other does not?

Regards
Paul

[joecar]

Its not just a case of one computer has the "Supported" check box checked and the other does not?

Regards
Paul

Ah, I'll check that, I'm oblivious to the smallest things...

[joecar]

Its not just a case of one computer has the "Supported" check box checked and the other does not?

Regards
Paul

Paul,

Yes that's it... checking "Supported" hides pids that are invalid even if they're invalid due to their dependent pids not being selected.

My eyes have been opened...

Thanks.

<- me

[Goldfinger911]

I thought I had a similar issue, but mine was a typo in my sae_generic.txt file. I put WB02 instead of WBO2 when enabling BEN calulations with the serial WB input.

===
# Innovate LC-1 WBO2
# ========================
*CLC-00-932
V 0.0 5.0 .1 "{EXT.AD1}"
AFR 10.0 20.0 .2 "({EXT.AD1}*3)+7.62"
*CLC-00-933
factor 0.0 2.0 .1 "{EXT.WO2AFR1}/{GM.AFR}"
*CLC-00-934
V 0.0 5.0 .1 "{EXT.AD2}"
AFR 10.0 20.0 .2 "({EXT.AD2}*3)+7.62"
*CLC-00-935
factor 0.0 2.0 .1 "{EXT.WO2AFR2}/{GM.AFR}"
===

[oztracktuning]

I have the messed up screen situation happening with Build 46 on any black box log that is older than the current build. Is there a way to fix this on my end.

[joecar]

I have the messed up screen situation happening with Build 46 on any black box log that is older than the current build. Is there a way to fix this on my end.

Steve,

Does your scantool screen look like post #66...?

If so then look at post #37, see if that helps: showthread.php?t=7643&page=4

Cheers
Joe

[joecar]

V2 pid/logging viewing interface suggestion:
could make left/right arrows scroll pids up/down by 8 each time.


EDIT: actually, I meant a screenfull each time.

[joecar]

Scantool suggestion:
when starting the scantool, let it open the last previous opened log file; have an option to enable/disable this.

[Blacky]

V2 pid/logging viewing interface suggestion:
could make left/right arrows scroll pids up/down by 8 each time.


EDIT: actually, I meant a screenfull each time.

Try using page-up and page-down.
Also home/end is first/last.
Shift + any movement will select ranges.

Regards
Paul

[Dirk Diggler]

My flash counters seem to have been corrupted

Calibration on 1536
Full reflash 24064

LOL my cable still has the plastic screen on it and hasnt seen THAT much usage. This is the tuning tool only

Details in cable menu are

Cal only 94
Full Flash 6