Originally Posted by
Kevin Doe
Just curious, what do I need to do to pass through the LC-1 data to the laptop? I had previously used the external analog inputs. Do I need to update something in the sae.generic.txt file?
This part?
# Innovate LC-1 WBO2
# ========================
*CLC-00-932
V 0.0 5.0 .1 "{EXT.AD1}"
AFR 10.0 20.0 .2 "({EXT.AD1}*3)+7.35"
*CLC-00-933
factor 0.0 2.0 .1 "{CALC.AFR_LC11.AFR}/{GM.AFR}"
I recommend adding new calc PIDs to the calc_PIDs.txt file in \My Documents\EFILive\V7.5\User configuration.
Here's one I prepared earlier:
Code:
# ==============================================================================
# File details
# ------------
#
# This section defines various details about the file format.
*FILE
#Parameter Value Description
#---------- ---------------- ---------------------------------------------------
VERSION 7.1.1 File version
DECSEP . Decimal separator used in this file
# ==============================================================================
# Units
# -------------------
# See sae_generic.txt for more information on the *UNITS section
*UNITS
#Code System Abbr Description
#-------- ---------- -------- -------------------------------------------------------------
None None "" "No units"
# ==============================================================================
# Add slot definitions here
# --------------------------------
# See sae_generic.txt for more information on "SLOT" formats
#
#Units Low High Fmt Expression
#------------ ------------- ------------- ---- --------------------------------------------------------------
# ALL Wideband serial controllers
# ===============================
*CLC-00-101
factor 0.0 2.0 .1 "{EXT.WO2AFR1}/{GM.AFR}"
*CLC-00-102
factor 0.0 2.0 .1 "{EXT.WO2AFR2}/{GM.AFR}"
# ==============================================================================
*PRN - Parameter Reference Numbers
# --------------------------------
# See sae_generic.txt for more information on the *PRN section
#
#Code PRN SLOT Units System Description
#------------------------- ---- ------------ ---------------- ---------------- ------------------------------------------
CALC.BEN1 F000 CLC-00-101 factor O2-Wide "Base Efficiency Numerator Bank 1"
CALC.BEN2 F001 CLC-00-102 factor O2-Wide "Base Efficiency Numerator Bank 2"