Code:
; _______________________________________________________________________
; | |
; | Copyright © 1999-2007 |
; | EFILive Limited |
; | web: http://www.efilive.com |
; | email: info@efilive.com |
; |_______________________________________________________________________|
;
; Modifications
; _________________________________________________________________________
; Version | When | Who | Why
; _________________________________________________________________________
; 8.0 | 2007-Feb-16 | PSB | Created file
; _________________________________________________________________________
;
; _________________________________________________________________________
*VEHICLES
;
;Vehicle selection list
;----------------------
;
; Cap1 and Cap2 form the "on-screen" display option from which the user may select.
; Controllers lists 1 or 2 "&" seperated pid memory map (*.pmm) files.
; PSL is the PID Selection defined later in this file
; PCU is the PID Custom Units defined later in this file
;
;Cap1 Cap2 Controllers (Engine&Trans) PSL PCU
;------- -------- -------------------------- ---------- --------
FD_Gen, , LS1B_M.pmm, FD_Gen, PCU
FD_Idle, , LS1B_M.pmm, FD_Idle, PCU
; _________________________________________________________________________
;
; PID Selection List
; ----------------------
;
; Node: Is one of PCM, ECM or TCM (use "-" for external PIDs).
; PIDs: Is one or more "|" seperated PID names. The first valid PID will be used.
; Alarm: Is 5 ":" seperated fields:
; min: Minimum value, below which the alarm will sound.
; max: Maximum value, above which the alarm will sound.
; style: Is one of:
; 0 = No sound, No LEDs
; 1 = Low pitch
; 2 = Medium Pitch
; 3 = High Pitch
; 4 = Very high Pitch
; 16 = Illuminate LED 1
; 32 = Illuminate LED 2
; 48 = Illuminate LED 3
; 64 = Illuminate LED 4
; 80 = Illuminate LED 5
; Add Pitch and LED values together to enable audio and visual alarms.
; For example, for Medium Pitch and LED 4, use 2+64 = 66
; time: Time (in 10ms increments) for which alarm will be sounded.
; hold: Time (in seconds) for which the displayed value will be frozen (not implemented yet).
;
; _________________________________________________________________________
*FD_Gen
;
;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
PCM, RPM, 0:6500:2:1:0
PCM, TP
PCM, AFR
-, WO2AFR1
PCM, KR
PCM, SPARKADV
PCM, ECT, -40:110:1:1:0
PCM, IAT
PCM, DYNCYLAIR_M
PCM, MAP
PCM, VSS
PCM, EOP
; _________________________________________________________________________
*FD_Idle
;
;Node PIDs (pid1|pid2|...|pidn) Alarm (min:max:style:time*10ms:hold*sec)
;---- -------------------------- -----------------------------------------
; Update with FD idle parameters.
; _________________________________________________________________________
;
;
;
; PID Custom Units
; ----------------------
;
; PCU specifies the controller and PID for which to define a custom unit
; Caption is the caption displayed on screen during BB logging (8 characters maximum).
; Prec is the number of decimal places to display
; Units is the display units name.
; Op is the operator, one of:
; * = multiply
; / = divide
; i = invert_then_multiply
; The metric value of the PID is multiplied, divided or inverted then multiplied by Factor.
; Offset is then added.
;
; _________________________________________________________________________
*PCU
;
; PID Caption Prec Units Op Factor Offset
; -------- -------- ---- ----- -- ------------- -------------
PCM,ECT, ECT, 0, °F, *, 1.8, 32.0
PCM,MAP, MAP
PCM,VSS, VSS, 0, mph, /, 1.609344,
PCM,SPARKADV, SPARKADV
PCM,IAT, IAT, 0, °F, *, 1.8, 32.0
PCM,MAF, AirFlow, 1, lb/m, /, 7.559873,
PCM,TP, TP
PCM,KR, KR
-, T1, T1, 1, °F, *, 1.8, 32.0
-, T2, T2, 1, °F, *, 1.8, 32.0