The Shelby setup use all the stock GM sensors. They added one more. It is a Rough Road Sensor. It as a G sensor mounted Verticaly.Originally Posted by joecar
CalEditor,
Did you delete the ICM and just let the PCM drive 8 coils (and what did you do for the CKP/CMP reluctor wheels)...?
Cheers
Joe
The 99 uses the stock crank and cam sensors. It used the stock coils.
The 2001 the Shelby Series II used the later style engine with 8 coils and the newer cranks sensors. This car was just a prototype, so I can't get my hands on the Cal ID.
I have a 2000 crank sensor a mapped out, but I have a raw mechanical version, not the electrical version yet.
Anyway much of this is
Reply With Quote