No low end power after z06 cam swap!!

[coryhussey]

hey all, i did a z06 cam and spring swap last weekend. It was a good install and makes good power after 2400 rpm's. I understand i lost some low end power by installing this cam, and dont want a huge stall right now, until i build my tranny. Besides bolt ons and FI can I tune in the bottom end power to be better on the street. I am looking for all around function, as I do more street and highway driving. I had justin at black bear do my tune before the cam. I currently have a 5.3 w/4l60e. A volant CAI with stock 3.73 gears. My tires are 285/75/16. I know that the tires are killing bottom end power as well, just not sure if 4.10's are gonna be my next mod. I dont wanna rev the motor too high and lose MPG on the highway. anyways, take a look at the log after all the current mods so far, and see if their is any room to play with much. Im new to this and need to know a little more info. thanks

cory

[Redline Motorsports]

See if this helps. Make sure you log KR at the lower dyn/cylair loads.

Howard

[coryhussey]

thanks alot for the help. Ill give it a try and see how it goes.

cory