Hi Guys,
I did this a few weeks back.
Just for those who may be interested in swapping to the 255 Walbro and can't find any info on it.
http://www.pacificp.com/forum/viewtopic.php?t=6878
Hi Guys,
I did this a few weeks back.
Just for those who may be interested in swapping to the 255 Walbro and can't find any info on it.
http://www.pacificp.com/forum/viewtopic.php?t=6878
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
Welcome Joe...if it helps someone out...great!
To date...no issues with it. I've run to just less than 1/4 tank without problem.
Actually...when I first put it in....it started and ran with about 2 gallons of fuel in the tank.
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
Man, you document things like a champ! Good werk.
01 C5 'vert A4
EFILive, PLX, & TNT are all we got at the moment.
i know this thread is old but i have done this modification aswell. and i recommend it over a complete sending unit replacement even for stock vehicles.
its actually quite easy, mines been running trouble free for a year, and the pump is not noisy IMO.
I used the GS342 Walbro and put a fitting in port to hook that line up to keep the bucket filled. I also re-used the accordian pressure line out, it fits over the pump outlet quite tightly, i then used a small clamp to retain it.
Lysholm supercharged 98 K2500 454
stumpuller454 welcome to the forum...
Welcome to the best tuning forum on the net 'Stumpy'.
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
Nice work.
I have the old Wahlbro that needs the bucket altered and
I've got to be careful taking corners with >1/8 of a tank of gas.
512k RoadRunner Firmware 12.14R
FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
LC-1 WBO2
_________________________________________________