Hi All,
well...ever since I swapped over to vista, I can't read my logs in metric.
I've tried going to properties ad seting it to metric...no go?
Any ideas?
Howard
Hi All,
well...ever since I swapped over to vista, I can't read my logs in metric.
I've tried going to properties ad seting it to metric...no go?
Any ideas?
Howard
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
Never mind....found it.
Thanks Joecar!In scantool PIDs tab, right click on each pid and select metric or imperial.
Howard
Howard
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
DUCT TAPE.
IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.
98 K1500 'HOLDEN' Suburban.
Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit
Howard,
Also go into the tunetool and edit the units configuration to set various tables and/or their row/col indexes to metric/imperial.
Follow the first bunch of links from here: showthread.php?t=2990
Cheers
Joe