Results 1 to 3 of 3

Thread: Balance rates

  1. #1
    New Member
    Join Date
    Apr 2008
    Posts
    2

    Default Balance rates

    Can some one please help me I am trying to check the balance rates on my injectors . I am new to this efi thing and we are trying to use my buddys efi live scan version 7.2 Can we use it or does it have to be updated?? Can someone walk us through this PLEASE!!!! THANKS......Sorry I own a 2004 chevrolet 2500 4x4 LB7..

  2. #2
    New Member
    Join Date
    Apr 2008
    Posts
    2

    Default

    Anyone??????????? Help!!!!!!!!!!!!!!!!!

  3. #3
    Senior Member
    Join Date
    Mar 2008
    Posts
    127

    Default

    Open up your scan tool and connect to the trucks ECM. Truck is better to be running. Open PIDS tab and highlight all 8 injector balance rate until the speedometer looks like it is colored. Then hit the little red or yellow button at the bottum of the screen and watch it in the DATA tab.

    Balance rates are +/- 4 running in "N" and idle, and +/- 6 in "D" at idle. Anything up to +4 or -4 is ok in "N" and I think you get the point.

    Hope this helps,
    Tony

Similar Threads

  1. injector flow rates
    By 02sierra4x4 in forum Gen III V8 Specific
    Replies: 1
    Last Post: September 30th, 2009, 06:05 PM
  2. Cant read balance rates on an 01
    By Dmax15 in forum Duramax LB7
    Replies: 7
    Last Post: August 14th, 2009, 03:28 PM
  3. 44lb injector Flow rates?
    By lownslo in forum Gen III V8 Specific
    Replies: 0
    Last Post: April 14th, 2009, 01:01 AM
  4. Ls1--ls6 injector flow rates
    By tblu92 in forum Gen III V8 Specific
    Replies: 4
    Last Post: September 25th, 2008, 02:26 AM
  5. TCC Apply/Relase Rates
    By joecar in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 1
    Last Post: August 22nd, 2005, 11:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •