Keep getting this error when I unzip and update for BBL , then open EFILive Explorer :
I just click o-k , anything to this ?
Keep getting this error when I unzip and update for BBL , then open EFILive Explorer :
I just click o-k , anything to this ?
2005 1500 HD , Custom OS3 SD tune .
2006 Trailblazer
Dinosaurs and Plants gave their lives so that we may drive , long live fossil fuel .
With the address shown in the dialog box, I can track down the source of the fault. Once I find it I'll let you know what is causing it and whether it will affect any further operation of the software.
Regards
Paul
Before asking for help, please read this.
First up, thanks heaps for the firmware fix. Great effort as usual!
I've been getting these off and on for that last couple of releases but had put them down to the work laptop image and / or my use of the laptop. I tend to you the "sleep" function heavily and only reboot if there is a Windows update or I start seeing problems like slow downs or the above mentioned "access violations". I have received these errors from the Hapi driver when connecting the V2, from the Tune tool when saving files and the scan tool at various times. From now on I'll note the addresses and pass them through.
Simon
Before asking for help, please read this.
Before asking for help, please read this.
Before asking for help, please read this.
I thought I should chime in. This is the first firmware and boot block I have had problems with. I first updated my v7x and v8 folders. Then started EFILive Explorer. I got the Access Violation. Second start attempt worked fine. I flashed the new boot block and it stuck in dead poll. Couldnt update the bootblock or firmware. The good news it, I went back to the 0414 EFILive Explorer, and reflashed that bootblock successfully. Then successfully flashed back to the 0414 firmware. Now it works fine. Tried the 0426 again and same errors. Went back to 0414 again and all is good. Mucho problems with this one looks like. Any logs you need or want to see, Paul?
2002 WS6, All-Lunati 383 Strok'r @11:1, Cartek Heads, Keith/Ross Racing Custom Cam, Victor Jr., 492whp 457wtq,
Cartek Clutch, 9" Moser w/4.11's, 35 spline Detroit Locker, QA1's, NX, BMR, Tuned w/ EFILive V2 Black Box Logging
Check Out My Latest Tune File: HERE
UPDATE: I used the 0414 EFILiveExplorer to flash the 0427 bootblock and firmware and now it seems to woork fine with the latest version. At least the version numbers in 'Explorer show it is current.. and I have the Inverse feature. Weirdness. All is good now I will try BBL in the morning.
Had the same problem with the Exeption Error
Noticed that when programming the firmware, EFI Explorer used to give a percent of completion. Mine just sat there, and finally said complete......Strange.....Hope it works tomorrow.
99 Silverado 2500 Extracab Longbed
33" BFG's - American Racing Rims
Custom Dual Upper console gauge mount w/Autometer Sport Comp - Pyro, Oil Temp
Autometer Sport Comp Boost/Vac in Custom Hypersonic Gauge Mount in dash
LS-1 6.0L w/AFR 205cc Street Heads
Vortech V2 blower
42# Injectors
Comp Cam - Custom Street Grind
TTS Catback Exhaust
Innovate LC-1 Wideband O2
Tune and Trans mods via EFILive V1-V2