Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Ok Yes Im A Dummy But..........need A Little Help Please

  1. #1
    New Member
    Join Date
    Jan 2007
    Posts
    9

    Question Ok Yes Im A Dummy But..........need A Little Help Please

    switched from v7.4.2 build 622 to 7.5.3 build 36 and Im getting "error failed controller operation has returned to normal operation please retry operation.. Im thinking I jumped so far from 7.4 to 7.5 my v2 might need reflashing................anyone know?........if so what drivers?........thanks

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    SDAVER,

    Welcome to the forum...

    When does it say that message...?

    Is the FTDI USB driver working correctly...?

    Did you flash V2 with firmware FSProg_V2_4_70.ffw...?

    I pm'd tech support, they will be a day or two.

    Cheers
    Joe

  3. #3
    New Member
    Join Date
    Jan 2007
    Posts
    9

    Default

    it all worked fine on 7.4(and still does).................not sure what drivers im using.........but im pretty sure thats the problem...............it connects to the ecm or tcm begins to read then i get the error and then a aborted read statement and the then the countdown timer. thanks
    2006 CHEVY 3500HD 4X4 CCLWB DUALLY LBZ : 4" into 5" mbrp, bd manifold, FASS 150 lift pump w/2micron filter,EFILIVE(great tuning delivered at the speed of light by IdahoRob), Suncoast IV 1057 triple lock, airraid intake, Kennedy headlight harness, 285 revos, leveling keys, 12.5k warn with air compressor, DEI alarm w/ remote start and turbo timer, Diamond Eye downpipe, Fleece Performance Cheetah 70 mm turbo
    585 rwhp 1115 lbft torque @danville

  4. #4
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    A change to 7.5.3 is recommended and will likely need the FlashScan V2 firmware to be updated as 'joecar' suggests.

    If you try again with the 7.5.3 release can you check for .blx files in your 'My Documents\EFILive\V7.5\Bug reports' folder which have a creation time matching your attempt and send them to support@efilive.com.
    Andrew
    EFILive Crew


  5. #5
    New Member
    Join Date
    Jan 2007
    Posts
    9

    Default

    OK
    1. cleared efi usb devices via control panel
    2. removed 7.5
    3. downloaded the usb clean utility.....cleaned
    4. re downloaded 7.5 installed
    5. downloaded new v2 for windows drivers
    6. plugged up v2 via usb......installed new drivers
    7. got all excited thought I might have accomplished something today. plugged into truck same error.

    I know its something simple Im missing........cant see the forest for the trees
    2006 CHEVY 3500HD 4X4 CCLWB DUALLY LBZ : 4" into 5" mbrp, bd manifold, FASS 150 lift pump w/2micron filter,EFILIVE(great tuning delivered at the speed of light by IdahoRob), Suncoast IV 1057 triple lock, airraid intake, Kennedy headlight harness, 285 revos, leveling keys, 12.5k warn with air compressor, DEI alarm w/ remote start and turbo timer, Diamond Eye downpipe, Fleece Performance Cheetah 70 mm turbo
    585 rwhp 1115 lbft torque @danville

  6. #6
    New Member
    Join Date
    Jan 2007
    Posts
    9

    Default

    bug reports sent.............thanks everyone
    2006 CHEVY 3500HD 4X4 CCLWB DUALLY LBZ : 4" into 5" mbrp, bd manifold, FASS 150 lift pump w/2micron filter,EFILIVE(great tuning delivered at the speed of light by IdahoRob), Suncoast IV 1057 triple lock, airraid intake, Kennedy headlight harness, 285 revos, leveling keys, 12.5k warn with air compressor, DEI alarm w/ remote start and turbo timer, Diamond Eye downpipe, Fleece Performance Cheetah 70 mm turbo
    585 rwhp 1115 lbft torque @danville

  7. #7
    EFILive Crew Site Admin Tordne's Avatar
    Join Date
    Oct 2004
    Posts
    3,870

    Default

    The reports did not come through, just links to them. You actually need to copy the actual files and attach to the email
    Andrew
    EFILive Crew


  8. #8
    New Member
    Join Date
    Jan 2007
    Posts
    9

    Default

    resent
    thanks
    2006 CHEVY 3500HD 4X4 CCLWB DUALLY LBZ : 4" into 5" mbrp, bd manifold, FASS 150 lift pump w/2micron filter,EFILIVE(great tuning delivered at the speed of light by IdahoRob), Suncoast IV 1057 triple lock, airraid intake, Kennedy headlight harness, 285 revos, leveling keys, 12.5k warn with air compressor, DEI alarm w/ remote start and turbo timer, Diamond Eye downpipe, Fleece Performance Cheetah 70 mm turbo
    585 rwhp 1115 lbft torque @danville

  9. #9
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,501

    Default

    In both of those *.blx trace file that you sent, EFILive was attempting to read the Allison TCM. Did you select the TCM to be read out?

    Regards
    Paul
    Before asking for help, please read this.

  10. #10
    New Member
    Join Date
    Jan 2007
    Posts
    9

    Default

    YES, same error for ecm or tcm.........7.4 still works fine
    2006 CHEVY 3500HD 4X4 CCLWB DUALLY LBZ : 4" into 5" mbrp, bd manifold, FASS 150 lift pump w/2micron filter,EFILIVE(great tuning delivered at the speed of light by IdahoRob), Suncoast IV 1057 triple lock, airraid intake, Kennedy headlight harness, 285 revos, leveling keys, 12.5k warn with air compressor, DEI alarm w/ remote start and turbo timer, Diamond Eye downpipe, Fleece Performance Cheetah 70 mm turbo
    585 rwhp 1115 lbft torque @danville

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •