Here is a stock 07 tbss file
Here is a stock 07 tbss file
The 08s use a different setup from GM, and therefore GM didnt bother to put or make the fan tables easily accessible. Im pretty sure 06 and 07s can change the fan type easily, but if you say the 07s cant Ive heard HPT can on 07s. They dont have 08s figured out either though.
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
Just like Erik said, the '08s are totally different. Seems that the '06s were the only ones that EFIlive had the ability to add on efans fairly easily. I know that they are swapping segments from other O.S.s in HPtuners to get the '07s and now the '08s (so I'm told that the '08 efan control as of a few days ago) to get the pin on the ECM to control efans. EFIlive (understandably) does not allow swapping segments between 2 different O.S. much less than 2 different ECMs E40 and E67 for reasons (I assume) as not to crash the ECM. However, there has to be a way to do this via patch or custom O.S. because that his how its getting done by other programs. Seems if there was a way to integrate the E38 fan control segment into the E40 / E67 with the option to select either a descrete on/off output for fan relay control (LS1 F body fans) or a PWM signal for variable speed fans (C6 Vette efan setup). That would be the hot ticket.
I tune my customer's vehicles with EFIlive. I don't want to have my truck tuned by HPtuners rendering my EFIlive incapable of reading / writing to my own ECM from their custom patch. Therefore, I'm holding off on tuning my own vehicle with my EFIlive hardware and patiently waiting to see if this can / will be implemented and if so, when.
Yes this is for my own benefit but I do believe that EFIlive is missing the boat on potential customers. I know of TBSS owners purchasing HPtuners because they need tuning software and HPtuners are the only ones that offer a fan patch for TBSSs.
Jay
The 2006 TBSS required a patch to get the e-fans to work. It was not a simple change to the G0910 table. After the patch, my G0910 table is set to discrete and a pin was added to the pcm to trigger the new fan relays.
I had a look at the Fan controls for the E67, there is over 100+ parameters/tables related to fan controls.
I was sent a file with the fans converted, however I don't think it was done with HPT, in any case, it appeared all that was done is to copy the entire fans 'section' from another vehicle in to the TBSS file.
I don't want to have to configure 100+ fan parameters over 50 O.S's to make this work. Maybe a patch of the fans section might be a better option given there is only 3 E67 OS's used on the TBSS from 07+.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
I no longer monitor the forum, please either post your question or create a support ticket.
Thanks so much for looking into this Ross
What are the 3 O.S.s for the '07+ E67 TBSS? I can try to do some digging on my end to help out.
I know of these 2:
12618164
12611938
The '08 Impala SS uses the 3 relay series / parallel system which could be one option to use for efans:
Last edited by JAY4SPEED; May 15th, 2008 at 04:02 PM.
Not according to these guys
http://www.tbssowners.com/forums/showthread.php?t=301
Or at least thats what i get out of reading it. No one said they needed a patch. ( i could be wrong, just didnt see it anywhere)
(one of the guys posted his through efilive even though the thread is title "through HPtuners")