Results 1 to 8 of 8

Thread: Where to start

  1. #1
    Junior Member 2500HeavyDuty's Avatar
    Join Date
    Apr 2008
    Posts
    20

    Default Where to start

    I just got my efi v1 with 2 licenses.

    Opened up the box and took a look at it and pretty much all i can say is



  2. #2
    Senior Member
    Join Date
    Mar 2008
    Posts
    127

    Default

    Load it into your laptop, then do some logging until you get the hang of what is going on insinde your engine. First thing to do is check your balance rates as that will tell you if you are going to need injectors soon!

    Holler if you need more help, lots on here will chime in.

    Tony

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    It helps to read the user manual PDF's for the scantool and tunetool... lots of info in there.

    And welcome to the forum...

  4. #4
    Junior Member 2500HeavyDuty's Avatar
    Join Date
    Apr 2008
    Posts
    20

    Default

    not just yet, i got different plans. ill clue yall in later

  5. #5
    Senior Member
    Join Date
    Mar 2008
    Posts
    127

    Default

    Quote Originally Posted by 2500HeavyDuty View Post
    not just yet, i got different plans. ill clue yall in later

    you got me scared, hope you have fun.

    Tony
    Mine2001 GMC 2500HD EC/LB, D/A. 4in MBRP exhaust, AFE Stage II w/Amsoil Ea air filter, ISSPRO boost/Pyro guages, PPE Boost Valve, EFI Live V2, Maximum OD Stage 2 Trans, Amsoil throughout, AirDog150, modded intake horn.

    540HP/1056TQ
    Dyno'd Danville Performance
    April 5th 2011

    Hers: 2006 GMC Envoy XL Denali, Flowmaster 40 with a bullet style resonator in the back, EFI Live with the help of JoeCar and other great members here.

  6. #6
    Junior Member 2500HeavyDuty's Avatar
    Join Date
    Apr 2008
    Posts
    20

    Default

    oh i will

  7. #7
    Senior Member
    Join Date
    Mar 2008
    Posts
    127

    Default

    You know what they say when you live in TX,
















    Everything is bigger in Texas, even the pain in the ass.



    I can say that, I lived there for two years. Fort Hood! 1ST CAV!

    Love that state,

    Tony
    Mine2001 GMC 2500HD EC/LB, D/A. 4in MBRP exhaust, AFE Stage II w/Amsoil Ea air filter, ISSPRO boost/Pyro guages, PPE Boost Valve, EFI Live V2, Maximum OD Stage 2 Trans, Amsoil throughout, AirDog150, modded intake horn.

    540HP/1056TQ
    Dyno'd Danville Performance
    April 5th 2011

    Hers: 2006 GMC Envoy XL Denali, Flowmaster 40 with a bullet style resonator in the back, EFI Live with the help of JoeCar and other great members here.

  8. #8
    Junior Member 2500HeavyDuty's Avatar
    Join Date
    Apr 2008
    Posts
    20

    Default

    Quote Originally Posted by horsehaulin View Post
    Load it into your laptop, then do some logging until you get the hang of what is going on insinde your engine. First thing to do is check your balance rates as that will tell you if you are going to need injectors soon!

    Holler if you need more help, lots on here will chime in.

    Tony

    thats the first thing i did....


Similar Threads

  1. COS and no start
    By turbogtu in forum General
    Replies: 1
    Last Post: September 15th, 2009, 01:27 PM
  2. Cold start perfect, Warm start flares high
    By samh_08 in forum Gen III V8 Specific
    Replies: 1
    Last Post: May 12th, 2009, 08:36 PM
  3. Cold start great but warm start sucks."Idle
    By mvvette97 in forum Gen III V8 Specific
    Replies: 11
    Last Post: October 25th, 2008, 11:22 PM
  4. Where to Start on an LB7?
    By LBZoom in forum Duramax LB7
    Replies: 4
    Last Post: October 7th, 2008, 06:30 AM
  5. Help, no start!
    By Leadfoot in forum General (Diesel)
    Replies: 12
    Last Post: October 2nd, 2008, 08:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •