EFI not same release as V2?

[RPM Motorsports]

ROOKIE HERE.....I went to read the ECM on my truck for the first time. It started to read, stopped and said something like Interface not up to date with V2, please update. It would not go any further. My Lap top does not have internet access. Is there any way to update my version (If that's the problem)?

[RPM Motorsports]

Anybody? I was hoping to get things started tonight!

[nevinsb]

Which version of the EFI-Live software do you have on the laptop?

What boot/flash version is installed on your flashscan? (Think this was under licensing)

[RPM Motorsports]

It says 7.5 on the CPU and I can only find a firmware 2.04.71, 14 APR 08. on the V2!

[nevinsb]

I would upgrade the laptop to 7.5.3. You will probably have to download it to the computer you are using now, and put it onto a CD for the laptop.
http://efilive.com/download.aspx

Welcome to the forums.
BTW, are you from http://www.raceprovenmotors.com/ ?

Also what model truck are you trying to read from?

[RPM Motorsports]

It's a 07 LBZ. Im not from the site you have shown. I have a small shop in Los Banos, Ca. building circletrack/Drag motor's! Thanks a bunch I'll see if it works.

[joecar]

RPM, welcome to the forum...

Yes, update the laptop to 7.5.3 as nevinsb said.



nevinsb, welcome also...

[RPM Motorsports]

Thanks, will it say 7.5.3 on the Icon after it's installed? Im not a CPU friendly person

[joecar]

Thanks, will it say 7.5.3 on the Icon after it's installed? Im not a CPU friendly person

It won't...

But, if you start either the scantool or tunetool, and do Help->About, you will see it says V7.5.3.

[RPM Motorsports]

Just checked my Lap top and it already says 7.5.3, Now what?
The exact message on the Laptop is " Flashscan V2 interface is not compatible with this version of EFI software Please upgrade EFI software on PC with latest version" ????? The only thing I had to do differently on install, was I had to install the USB Driver the long way due to WIn98.