Results 1 to 3 of 3

Thread: Changing usb cable on FSV2

  1. #1
    Senior Member
    Join Date
    Feb 2005
    Posts
    103

    Default Changing usb cable on FSV2

    High all, i just changed the USB cable, the old one had a few too many km's on it lol!

    ever since the change, i have logging and flashing issues, particularly with the e38 pcm.

    when i log the e38, a few minutes later the logging stops, then the "abort" message comes up.the logging is also VERY slow, and i have lost the cursor, ie: i cannot use the mouse to select certain logged data, i have to use the arrow buttons.

    when i try to flash the e38, an error message comes up saying, either bootloader rejected or cannot comunicate with pcm check cable connection etc etc.

    if i disconnect the obd cable then reconnect and try to reflash all works fine.

    it may be a coincidence, but the day i changed the usb cable is the same day i updated to the latest bbl software.

    do you think its the cable or the update?

  2. #2
    Senior Member
    Join Date
    Mar 2004
    Posts
    173

    Default

    are you running 26 4 update from this post & loaded the 27 4 update from the 5th post


    http://forum.efilive.com/showthread.php?t=7905

  3. #3
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by AGRO View Post
    when i log the e38, a few minutes later the logging stops, then the "abort" message comes up.the logging is also VERY slow, and i have lost the cursor, ie: i cannot use the mouse to select certain logged data, i have to use the arrow buttons.
    Try pressing F2 which toggles mouse control of the chart inspector on and off.

    Quote Originally Posted by AGRO View Post
    do you think its the cable or the update?
    I don't think it will be the cable.
    As NTAE asked are you using the very latest bet software?

    Regards
    Paul
    Before asking for help, please read this.

Similar Threads

  1. Changing OS
    By lownslo in forum Gen III V8 Specific
    Replies: 0
    Last Post: October 30th, 2009, 03:40 AM
  2. Changing BEN map from AFR to ?
    By ssvolvo in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: May 7th, 2008, 05:48 AM
  3. Changing IFR
    By Beer99C5 in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: September 28th, 2006, 05:40 AM
  4. changing from F to C
    By batesyellow01 in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: July 21st, 2006, 07:28 AM
  5. changing ecm
    By 69camaro5speed in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: June 17th, 2006, 02:19 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •