i need to got out of beta

[nycblazer]

Flashscan Info
----------------------------
FIRMWARE
Ver: 2.05.16
Date: APR 14, 2008
-----------------------------
BOOT BLOCK
Ver: 2.05.06
Date: APR 07, 2008

[Ira]

Please can you tell me the last few digits of your S/N?

Ira

[nycblazer]

Flashscan Info
---------------------
FIRMWARE
Ver: 2.05.16
Date: APR 14, 2008
---------------------
BOOT BLOCK
Ver: 2.05.06
Date: APR 07, 2008
---------------------

[nycblazer]

Please can you tell me the last few digits of your S/N?

Ira

pmed

[nycblazer]

ok i got it back on and its working after warming it up.
now i have
-----------------------------------
FIRMWARE
Ver: 2.05.17
Date: MAY 06, 2008
-----------------------------------
BOOT BLOCK
Ver: 2.05.08
Date: APR 25, 2008
-----------------------------------

but now i cant Load the FlashScan Firmware File:
\Program Files\EFILive\V7.5\FSProg_V2_4_72.ffw
when i open the update flashscan firmware its not reading it and it is in dead-poll mode

[Ira]

From now on you need to use EFILive Explorer to talk to the FlashScan, you'll never need "update flashscan firmware" again.

Ira

[ScarabEpic22]

And thats the latest beta FW, never use and FW from the V7.5 folder anymore as it is not compatible with the BBL beta stuff.

[nycblazer]

i was going by what the read me file said.

now how do i load or reflash my e67 ecm and i need to licence it, i still have 2 vins available.
i need to load a completly different operating system to the ecm. the one i need to load now is the 2007 cadilac cts-v 6 speed tune file. i have the file already but cant load it.

[joecar]

ok i got it back on and its working after warming it up.
now i have
-----------------------------------
FIRMWARE
Ver: 2.05.17
Date: MAY 06, 2008
-----------------------------------
BOOT BLOCK
Ver: 2.05.08
Date: APR 25, 2008
-----------------------------------

but now i cant Load the FlashScan Firmware File:
\Program Files\EFILive\V7.5\FSProg_V2_4_72.ffw
when i open the update flashscan firmware its not reading it and it is in dead-poll mode

Does your V2:
- connect to your vehicle...?
- connect to your PC (scantool, tunetool, explorer)...?

With those FW/BB versions your V2 should be working now.

You don't need (and can't use) the file FSProg_V2_4_72.ffw so don't try to program it;
From now on you use the "explorer" (EFILive Explorer, EE) to update firmware/bootblock on your V2 and to retrieve BBL files.


Cheers,
Joe

[nycblazer]

can i still use the EFILive V7.5 Tune Tool and the EFILive V7.5 Scan Tool

or what do i use to license a vin and reflash the ecm