Results 1 to 4 of 4

Thread: Fuel Segments for 1998 T/A

  1. #1

    Default Fuel Segments for 1998 T/A

    Hello all,

    You guys have been a huge help with converting the 411 and I am having issues with the fuel gage. I followed what was said in another thread about how to make this work and for some reason no matter what I do it is not working properly.

    Before I installed the PCM I thought I loaded the express van into COS3 so I could just transfer it over, but apparently not. Now that I have COS3 on the 2002 OS I can not just open the express van cal and OS to copy the fuel segment. Does someone have a plain express van loaded on COS 3 so I can do this the easy way?

    Thank you,
    -Kenny

    ps..if anyone has a detailed step by step as to how to do this that would be greatly appreciated also. I am prety sure I am doing this in the right sequence...but who knows.

  2. #2
    Lifetime Member SSpdDmon's Avatar
    Join Date
    Jun 2005
    Posts
    1,558

    Default

    Hmmm...wonder if it's a cluster issue??? I'm pretty sure the '99+ clusters are different. You have one you can pull out of a '99+ and test?

  3. #3
    Lifetime Member ChipsByAl's Avatar
    Join Date
    Feb 2006
    Posts
    617

    Default

    Kenny what kind of problems are you having? The Express file should work as is in your Truck. You may need to adjust the fuel tank size and F0507 to read accurately.
    Al
    "Trash that carb and get Injected!"

  4. #4

    Default

    Sorry guys. I should have asked the customer first before I posted. I thought about it last night and when I figured in the 3 Walbros that are in tank I had a feeling that the sender was messed up. Sure enough it is and the shop that did the install will be repairing it after I am finished with the tune.

    Sorry for the false post and thank you for the speedy responses guys.

    -Kenny

Similar Threads

  1. one or more invalid checksum segments
    By SGFastMax in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 4
    Last Post: March 16th, 2010, 04:22 AM
  2. E38 w/ No transmission Segments
    By Shupe in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 2
    Last Post: September 14th, 2008, 12:32 AM
  3. 1998 Vortec timing and fuel issues
    By KAZ MotorSports in forum Vortec V6/V8 Specific
    Replies: 9
    Last Post: May 26th, 2008, 06:01 PM
  4. 1998 WS6, Need some help......
    By Dick in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 20
    Last Post: June 1st, 2006, 11:12 PM
  5. 1998 with 2 bar MAP
    By WicketMike in forum General (Petrol, Gas, Ethanol)
    Replies: 11
    Last Post: February 13th, 2006, 04:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •