Results 1 to 2 of 2

Thread: Do I need a PID to LOG serial data?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Lifetime Member Chalky's Avatar
    Join Date
    Sep 2003
    Posts
    617

    Default Do I need a PID to LOG serial data?

    Using SM-AFr and just wired up a MAX3232 ic. Can't figure out how to get SM-AFR to retrieve signal.
    2015 Z06 A8

  2. #2
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    I presume that is a PLX device?
    Make sure to select PLX in the FlashScan setup menu. Or when displaying AFR data on FlashScan's LCD screen, use Ctrl+Backspace to scroll through the supported wide band controllers.

    You need to be using the V2.05.17(0512) firmware that ships with the EFILive V7.5.4 BBL Beta software, here:
    http://forum.efilive.com/showthread.php?t=8033

    Then use the PIDs:
    Code:
    EXT.WO2ST1                 F408 SED-16-900   .                External         "External Wideband Sensor State"
    EXT.WO2ST2                 F409 SED-16-900   .                External         "External Wideband Sensor State"
    EXT.WO2LAM1                F40A UNM-16-913   "lambda"         External         "External Wideband Lambda"
    EXT.WO2LAM2                F40B UNM-16-913   "lambda"         External         "External Wideband Lambda"
    EXT.WO2AFR1                F40C UNM-16-914   "AFR"            External         "External Wideband AFR"
    EXT.WO2AFR2                F40D UNM-16-914   "AFR"            External         "External Wideband AFR"
    Regards
    Paul
    Before asking for help, please read this.

Similar Threads

  1. Motec PLM Serial Data to V2
    By RetroAus in forum FlashScan V2
    Replies: 10
    Last Post: February 6th, 2016, 11:32 AM
  2. BBL & Serial LC-1
    By L31Sleeper in forum FlashScan V2 BB Logging
    Replies: 3
    Last Post: January 19th, 2010, 11:01 AM
  3. LM1 through the 9 pin serial...
    By rubbersidedown in forum FlashScan V2
    Replies: 0
    Last Post: August 2nd, 2008, 02:00 AM
  4. Do I need a PID to LOG serial data?
    By Chalky in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 15th, 2008, 05:39 AM
  5. WB serial to LT serial?
    By Bruce Melton in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: May 12th, 2008, 09:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •