Page 1 of 7 123 ... LastLast
Results 1 to 10 of 61

Thread: EFILive 7.3 pre-release software is now available

  1. #1
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default EFILive 7.3 pre-release software is now available

    Download the latest EFILive V7.3 pre-release software here:
    http://www.efilive.com/downloads/downloads_730.html
    A complete CD-based software installation package will be available soon.
    Please post any issues in this thread.

    Regards
    Paul

  2. #2
    Lifetime Member SinisterSS's Avatar
    Join Date
    Sep 2003
    Posts
    409

    Default

    It is either my imagination or the software is much faster at processing user input and displaying graphs, etc. Probably not my imagination...
    2009 Z06 LS7 / 2008 Sierra Denali AWD L92 6L80E
    Flashing control modules since 2001. 8-)
    Who needs a MAP sensor on a supercharged LS6 anyway.


  3. #3
    Lifetime Member
    Join Date
    Jun 2003
    Posts
    205

    Default

    I noticed that also

    Still trying to figure out how gm stuffed all this stuff into less then 1mb

  4. #4
    Lifetime Member
    Join Date
    Sep 2003
    Posts
    688

    Default

    Woot the idle trim pids were added in this release and i have allready tested it out and used it
    EFILive - The Single version of the Truth

    Larry - HumpinSS

  5. #5
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    505

    Default

    Quote Originally Posted by Dirk Diggler
    Woot the idle trim pids were added in this release and i have allready tested it out and used it
    Thanks for the hint . I was going to wait till later......now I'll do it now. Suspense eats at me! :lol:

  6. #6
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Quote Originally Posted by Dirk Diggler
    Woot the idle trim pids were added in this release and i have allready tested it out and used it
    In the scanner? What are they named? I can't find them.
    Thanks
    joe
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  7. #7
    Guess who's back!!!! Black02SS's Avatar
    Join Date
    Jan 2004
    Posts
    1,355

    Default

    Yes in the scanner, they are under "Idle". Also, if you click more info on them it will give you a nice description along with the field in Live they correspond to.

  8. #8
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    505

    Default

    Quote Originally Posted by Dirk Diggler
    Woot the idle trim pids were added in this release and i have allready tested it out and used it
    How did it go, Dirk?

    Looks like we scan all idle airflow determinants and the various contributions!!

    My son said kiddingly, " you guys have too many parameters, you need a slide bar with "Good" at one end and "Best" at the other end." I laughed then...but.......EFILive is making tuning a heck of a lot easier ( I don't think I'd like the slide bar).

    Cheers,
    joel

  9. #9
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    505

    Default

    Quote Originally Posted by jfpilla
    Quote Originally Posted by Dirk Diggler
    Woot the idle trim pids were added in this release and i have allready tested it out and used it
    In the scanner? What are they named? I can't find them.
    Thanks
    joe
    They're " IAC_xxx_DMA" pids, Joe.

    Long Term Correction In Gear AC Off

    Short Term Correction In Gear AC Off etc.

    Cheers,
    joel

  10. #10
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Not all PCM's idle DMA PIDs have been configured yet. Some PCMs may still show them as unsupported.
    Ross is working on adding in the rest of the PIDs over the next few days. So if your PCM shows some or all idle PIDs as unsupported just wait for the next update for them to be available.

    Regards
    Paul

Page 1 of 7 123 ... LastLast

Similar Threads

  1. Software issues with build 99 pre release...
    By LBZoom in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 2
    Last Post: January 18th, 2010, 03:25 AM
  2. Replies: 22
    Last Post: January 8th, 2007, 01:15 PM
  3. EFILive 7.3 pre-release software has been updated - again
    By Blacky in forum General (Petrol, Gas, Ethanol)
    Replies: 23
    Last Post: August 24th, 2005, 08:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •