Results 1 to 3 of 3

Thread: setting rev imiter for racing?

  1. #1
    Member ace68's Avatar
    Join Date
    Jun 2004
    Posts
    97

    Default setting rev imiter for racing?

    Is it possable to set the limiter so when I'm staged I can just floor the throttle and hit the limiter at 4500rpm but whne I release the clutch the engine can rev to 6500rpm?


    I know there is a limiter that does this independantly but can it be done buy efilive through the cars pcm?

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default Re: setting rev imiter for racing?

    Quote Originally Posted by ace68
    Is it possable to set the limiter so when I'm staged I can just floor the throttle and hit the limiter at 4500rpm but whne I release the clutch the engine can rev to 6500rpm?


    I know there is a limiter that does this independantly but can it be done buy efilive through the cars pcm?
    In our latest release of custom O.S upgrades we have a user selectable rev limiter, you can wire up a switch to enable a lower rev limiter when the switch is closed. I guess it could be mounted on the steering wheel?.
    Problem with doing it off the clutch switch is it will do it everytime the clutch is pressed. I am not sure how sensitive or how much travel the clutch can have before the switch is pressed, but it may switch to the lower rev limit just as you shift 2 - 3.
    At least with a seperate switch once it is opened (as you leave the line / dump the clutch) then it cannot come back on as you shift gears.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Member ace68's Avatar
    Join Date
    Jun 2004
    Posts
    97

    Default

    hey that's the valet switch hummmmm, that could work out


    yea I'll try setting something up with the valet switch.

Similar Threads

  1. EFI with Mercury Racing Motors?
    By Donovan in forum General (Petrol, Gas, Ethanol)
    Replies: 18
    Last Post: September 4th, 2012, 09:58 AM
  2. Drag Racing logs
    By oztracktuning in forum Gen III V8 Specific
    Replies: 0
    Last Post: November 7th, 2007, 11:45 PM
  3. C.o.m.e racing cam idle settings
    By JCA in forum General (Petrol, Gas, Ethanol)
    Replies: 12
    Last Post: September 22nd, 2007, 12:29 AM
  4. Fan programming for Drag Racing
    By oztracktuning in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: July 30th, 2006, 02:19 AM
  5. hey guys, need help before I go racing tomorrow
    By tgeers in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: July 29th, 2006, 08:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •