Some guidance required!!!!

[topfuelman]

Tried to do a driving log and managed to collect some data. Not really sure what I'm doing right or wrong.
I know the car is mostly running rich but I am not sure where/what to tackle in the tune.

I am attaching the log and the tune that is in the car.
This is a tune that was provided to me as a starting point for my combination, but was not expected to be correct as is.

Engine has ITB's, and is running SD. 383 c.i LS1 stroker, manual.
altitude up here is about 4500 ft above sea level. The car has race cats, and full dual 3" - 2.5" exhaust.

I have not touched the tune file that was provided to me, other than I scaled the injectors flow table to what I thought was correct for my 42lb delphi injectors running at 58psi fuel rail pressure.

Can anyone offer any advice for the me to give to the fellow that will be helping me tune this on a Mustang load dyno.

Thanks,

T