Page 1 of 8 123 ... LastLast
Results 1 to 10 of 74

Thread: RR 'Guts KIt' installation???

  1. #1
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,356

    Default RR 'Guts KIt' installation???

    No instructions so I'm assuming (we all know what that word means ) it's pretty straightforward????
    Anyone installed one before?
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  2. #2
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    568

    Default

    RoadRunner LS1 Realtime Emulation PCM - $599.00
    Roadrunner-DIY: "Guts" Kit $489.00
    For $110 is it really worth the effort? For the extra $110 you get a complete and tested RR with backup and warranty.
    It's all good until it goes "Bang"

  3. #3
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,356

    Default

    It's all done and I can connect to the RR.
    The issue I have now is the message telling me it's not licenced to EFILive???
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  4. #4
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    568

    Default

    To use your RR with EFIlive you also need to buy a RR EFILive realtime license at $199. You also need to enter the RR's serial number into you scan tool in the registration box as shown in the attached pics.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	license.jpg 
Views:	165 
Size:	216.0 KB 
ID:	3448   Click image for larger version. 

Name:	register.jpg 
Views:	157 
Size:	230.3 KB 
ID:	3449  
    It's all good until it goes "Bang"

  5. #5
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,356

    Default

    Yep...bought the licence and have all the info installed
    Says set to demo.
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  6. #6
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    568

    Default

    Have you installed it into a new license tab by itself, or did you modify your existing license tab and add the RR serial number and new license key?
    It's all good until it goes "Bang"

  7. #7
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,356

    Default

    installed it into the #1 position
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  8. #8
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    568
    It's all good until it goes "Bang"

  9. #9
    Lifetime Member hquick's Avatar
    Join Date
    Jan 2007
    Posts
    1,356

    Default

    Don't know what I did....but it's now working.
    Howard

    YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T
    MOVE AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE
    DUCT TAPE.
    IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM.


    98 K1500 'HOLDEN' Suburban.
    Custom Whipple SC, Mercruiser Marine intake, 0411 PCM, 4L80E w/shift kit

  10. #10
    Senior Member
    Join Date
    Jun 2005
    Posts
    113

    Default

    Did you have a hammer close to the PCM? Like within 2m? That works well for me most of the time
    Hello, my name is Erik and I am a horsepower addict...





Page 1 of 8 123 ... LastLast

Similar Threads

  1. RoadRunner guts kit?
    By s10mods in forum RoadRunner Real-Time PCM Emulator
    Replies: 118
    Last Post: February 23rd, 2017, 11:47 AM
  2. Guts Kit installation
    By SS2win in forum RoadRunner Real-Time PCM Emulator
    Replies: 29
    Last Post: March 6th, 2015, 12:41 AM
  3. Im making a tutorial for the Roadrunner guts kit install today.
    By wait4me in forum RoadRunner Real-Time PCM Emulator
    Replies: 7
    Last Post: October 5th, 2008, 04:33 PM
  4. Installation CD Problems
    By shallow bay in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: November 6th, 2006, 02:10 PM
  5. PLX M-250 Installation
    By Patches in forum General (Petrol, Gas, Ethanol)
    Replies: 9
    Last Post: February 17th, 2005, 06:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •