Results 1 to 5 of 5

Thread: tune burning up TC

  1. #1
    Member
    Join Date
    Feb 2008
    Posts
    63

    Default tune burning up TC

    I really need some input on this. I think im fixing to pay for a 2800 stall that has 5K miles on it that burnt up. My tune is attached but dont take it as a whole although the trans part is what the truck is running on. I was told it burnt up due to a slow PWM. Seems to me to be a defect. If its in the tune i will be glad to pay but it just doesnt add up to me. Its on a 04 turbo 4.8 silverado. Turbo was installed for approximately 1000 miles tops before trans went. I was told that PTC, performance torque converters, uses a different lock up clutch than stock and perhaps thats why it went. Any input is greatly appreciated, I now have found some provisions to tighten the PWM up thanks to joecar. heres the only tc log i have. Truck is on jackstands...
    Attached Files Attached Files
    Last edited by charcold-bowtie; June 13th, 2008 at 01:34 PM. Reason: log added

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    C-B,

    You might also want to post your log, it shows the TCCDC being commanded down during lock.

  3. #3
    Member
    Join Date
    Feb 2008
    Posts
    63

    Default

    bump for the austrailian morning....... when it comes.....

  4. #4
    Senior Member
    Join Date
    Jan 2008
    Posts
    100

    Default

    good luck, I've not had any

    bump for ya
    Last edited by NASABlue; June 14th, 2008 at 11:45 PM.
    97 MN6 vette, Vortek, BBK 80 FAST 78 manifold, 42# racetronix, lingenfelter edlebrock heads 202cc, 228 232 .622 .630 111+2, patriot dual ex, yt roller rockers, lg pro, now with cats, .041 Mr. Gasket (cometic leaked), 62cc head, ~60 cc chambers, custom built coilovers, ADDCO sway bars

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    ??????

Similar Threads

  1. Replies: 5
    Last Post: August 5th, 2008, 02:35 PM
  2. Tune VE and MAF tables or leave VE stock and tune MAF only
    By BlackGMC in forum Gen III V8 Specific
    Replies: 2
    Last Post: August 4th, 2008, 08:05 PM
  3. What else can I tune without scanning or black boxen it? Tune history inside.
    By Round Rock TJ in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: May 3rd, 2007, 02:27 AM
  4. Convince me to change to a 2bar tune...709rwhp through an EFI maf tune.
    By onfire in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 7
    Last Post: June 16th, 2006, 12:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •