Results 1 to 5 of 5

Thread: 08 Vortec Max cng

  1. #1
    New Member
    Join Date
    Mar 2007
    Posts
    3

    Default 08 Vortec Max cng

    I have a 2008 Vortec Max with a 6.0L that has been convertered to run off
    of Compressed Natural Gas as well as gasoline. It is driver controlable to pick
    what fuel to run off of. When running on CNG it is setting P069E in the Ecm and P2635 in the Fuel pump control module. I took care of the P069E in the Ecm with Efi, but the P2635 is still commanding the MIL through the FPCM.
    Any ideas?

    Thanks

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Mmm, interesting.
    The problem might be the FPCM is simply sending a turn MIL on request which the ECM is doing, rather than the ECM processing the fault itself, which is why you can't switch it off.
    What operating system is the .tun file you are working with?

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    New Member
    Join Date
    Mar 2007
    Posts
    3

    Default

    yes, that's what's happeing, I can monitor the engine data and see that ECM is commanding the MIL, but not because of a DTC. The operating system is 12617631.

    Thanks,

    Shawn

  4. #4
    Lifetime Member MN C5's Avatar
    Join Date
    Mar 2005
    Posts
    376

    Default

    If your interested in sharing any of the details of the CNG conversion I'd love to hear about it. And pictures would be a huge bonus!

  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Shawn, I don't think there is going to be much that can be done.

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

Similar Threads

  1. vortec 4.3
    By 770johnnyw in forum Vortec V6/V8 Specific
    Replies: 8
    Last Post: April 11th, 2010, 02:55 AM
  2. vortec v6 to vortec v8 swap
    By grezzmky in forum Vortec V6/V8 Specific
    Replies: 6
    Last Post: September 21st, 2009, 05:49 AM
  3. 98 Vortec 454
    By knagel in forum Vortec V6/V8 Specific
    Replies: 0
    Last Post: October 7th, 2008, 01:21 PM
  4. 96/97 vortec
    By 69camaro5speed in forum General
    Replies: 0
    Last Post: January 1st, 2008, 05:01 PM
  5. 96-98 Vortec 5.7
    By Buzzard in forum Vortec V6/V8 Specific
    Replies: 2
    Last Post: May 24th, 2007, 10:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •