Results 1 to 5 of 5

Thread: 2 LC1's via serial link?

  1. #1
    New Member
    Join Date
    May 2008
    Posts
    7

    Default 2 LC1's via serial link?

    Hi All,

    Is it possible to hook up two LC1's via the serial input?
    The wiring solution is nicer than trying to use the analogs.

    Cheers

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Yes... V2 BBL has two sets of serial pids.

  3. #3
    New Member
    Join Date
    May 2008
    Posts
    7

    Default

    Thats great.

    Is there a diagram as to how to wire two serials up. One is obviously fairly easy, but the stock serial cable only has one input jack.

    Cheers

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Plug in the serial terminator jack/plug into SERIAL IN on WB #2.
    Connect SERIAL OUT on WB #2 to SERIAL IN on WB #1.
    Connect SERIAL OUT on WB #1 to the DB9 null-modem-gender-bender.
    Connect the gender-bender to FlashScan V2 RJ12 input.

    [or you can make your own DB9->RJ12 null-modem cable.]

    See these links:
    showthread.php?t=7532
    showthread.php?t=8115
    http://www.sfcable.com/cable/p/30D1-C1-S.html

  5. #5
    New Member
    Join Date
    May 2008
    Posts
    7

    Default

    That would make sense

    Thanks for your help!

Similar Threads

  1. Link to GM T43 factory calibrations?
    By C6Guy in forum Gen IV V8 Specific
    Replies: 2
    Last Post: May 14th, 2010, 07:37 AM
  2. {B4105} how do i link this table?
    By mr.prick in forum Tips and tricks
    Replies: 7
    Last Post: July 5th, 2008, 05:20 AM
  3. Link to MAP
    By TAQuickness in forum General
    Replies: 1
    Last Post: September 8th, 2006, 04:07 AM
  4. i need a link
    By NviouSS in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: October 13th, 2005, 09:52 PM
  5. VAT Re-link
    By hpcubed in forum General (Petrol, Gas, Ethanol)
    Replies: 0
    Last Post: July 13th, 2005, 09:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •