Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Picked up a OLD AutoTap V1

  1. #11
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by N0DIH View Post
    Autotap hooked up me with the correct AutoTap registration info and EFILive's V6 registration info. They said that is what that one was setup for.

    What vehicles can be used with V6?
    If you have a V6 registration you can upgrade it free to V7, just email me your V6 registration details (paul@efilive.com) and I'll send you back a V7 registration.

    Regards
    Paul
    Before asking for help, please read this.

  2. #12
    New Member
    Join Date
    Mar 2009
    Posts
    4

    Default

    Quote Originally Posted by Blacky View Post
    The AT1 designation is not the version number.

    AT1 means a GM specific cable.
    AT2 means a Ford specific cable
    AT3 means a Chrysler specific cable
    AT123 mean a cable that supports all three manufacturers.

    AutoTap V1 cables come in AT1, AT2, AT3 and AT123 versions, are black and are RS232 serial cables. (Not supported by EFILive)

    AutoTap V2 cables come in AT1, AT2, AT3 and AT123 versions, are black and are RS232 serial cables. (Supported by EFILive)

    AutoTap V3 cables support GM, Ford and Chrysle, are red and are USB. (Supported by EFILive)


    Regards
    Paul
    So the V1 and V2 are described as looking the same. Is there a way to tell which we are looking at?

  3. #13
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Look on the side of the AT1 unit and you will either see a silver sticker with a serial number on it or you won't. If the sticker exists then it is a V2, if there is no sticker then it is a V1 (V1's do not have serial numbers).

    If you think the sticker may have been removed, then you'd need to hook it up to EFILive (and a vehicle to supply power), and attempt to connect to it. EFILive will show whether it is a V1 or a V2.

    First image: select the AutoTap V1 cable type.

    Second image: select to connect to FlashScan only - which simply means only make a connection to the interface cable (AutoTap or FlashScan) and not to the vehicle.

    Third image: display the [F6 Console] tab page and view the details that are displayed by EFILive.

    Regards
    Paul
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Image1.png 
Views:	284 
Size:	24.0 KB 
ID:	4810   Click image for larger version. 

Name:	Image2.png 
Views:	243 
Size:	43.5 KB 
ID:	4811   Click image for larger version. 

Name:	Image3.png 
Views:	290 
Size:	86.5 KB 
ID:	4812  
    Before asking for help, please read this.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Can I do anything with this AutoTap cable?
    By spoolin7 in forum General (Petrol, Gas, Ethanol)
    Replies: 14
    Last Post: April 20th, 2010, 03:03 PM
  2. Autotap
    By Grey Silver in forum Gen III V8 Specific
    Replies: 0
    Last Post: November 24th, 2007, 11:40 AM
  3. AutoTap and FlashScan V2
    By CGTMS in forum General
    Replies: 1
    Last Post: December 20th, 2006, 10:29 AM
  4. Need some help w/ AutoTap and my Ford...
    By ToplessTexan in forum Lounge
    Replies: 4
    Last Post: December 10th, 2005, 07:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •