Hey, no worries I appreciate your time. I've been trying to tune the idle on my '04 Vette for weeks. I was hopeing this was the golden answer. Thank you again for your time.
Hey, no worries I appreciate your time. I've been trying to tune the idle on my '04 Vette for weeks. I was hopeing this was the golden answer. Thank you again for your time.
\'04 Z16 Corvette, AFR 205 heads, Comp 228/232 114+4 LSA custom cam, HS Rockers, Kooks 1 7/8\' headers, 3\" X-pipe, stock Ti tail section. \'98 Corvette Pace Car, \'04 Chevy Avalanche Z71 4X4.
Thanks Dirk - gotta try these out! Like said above, you only get a couple of chances on the cold ones!
GM EFI Tuner
02 WS6 9.41 @ 143 MPH 3675#, drag radials, pump gas, through the mufflers - sold
The IAC PIDs for a few operating systems were not included in the first 7.3 release. They have now been added and will be available shortly. It has nothing to do with ETC or no-ETC - just we didn't get them all done in time for the 7.3 pre-release.Originally Posted by Z16DNA
Regards
Paul
Paul, this is great news. I know your doing your best. Thank you for all your efforts.
Kevin
\'04 Z16 Corvette, AFR 205 heads, Comp 228/232 114+4 LSA custom cam, HS Rockers, Kooks 1 7/8\' headers, 3\" X-pipe, stock Ti tail section. \'98 Corvette Pace Car, \'04 Chevy Avalanche Z71 4X4.
I copied this into my cal_pid.txt file and keep getting an error. It says it can not find the unit. Is part of this missing?Originally Posted by Dirk Diggler
Thanks,
Bill
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
Dirk ! Thanks for the Calc PIDs.
Works very well with ETC.
BowlingSS- Go to -> My Documents -> EFIlive-> V7 -> User Configuration-> PIDS -> calc_pids. Then copy and paste this ->
below this section->*CLC-00-000
gps -32.0 32.0 2 "{GM.IAC_LTDAC_DMA} + {GM.IAC_STD_DMA}"
*CLC-00-001
gps -32.0 32.0 2 "{GM.IAC_LTD_DMA} + {GM.IAC_STDAC_DMA}"
*CLC-00-002
gps -32.0 32.0 2 "{GM.IAC_LTPNAC_DMA} + {GM.IAC_STPN_DMA}"
*CLC-00-003
gps -32.0 32.0 2 "{GM.IAC_LTPN_DMA} + {GM.IAC_STPNAC_DMA}"
of YOUR Existing Calc pid file.# Units
# -------------------
# See sae_generic.txt for more information on the *UNITS section
*UNITS
#Code System Abbr Description
#-------- ---------- -------- -------------------------------------------------------------
Then do the same copy and paste of this->below this section ->CALC.RAFIG F600 CLC-00-000 "gps" CALC "Idle Airflow Correction AC off, in gear"
CALC.RAFACIG F601 CLC-00-001 "gps" CALC "Idle Airflow Correction AC on, in gear"
CALC.RAFACPN F602 CLC-00-002 "gps" CALC "Idle Airflow Correction AC on, P/N"
CALC.RAFPN F603 CLC-00-003 "gps" CALC "Idle Airflow Correction AC off, P/N"of the same calc pid file.*PRN - Parameter Reference Numbers
# --------------------------------
# See sae_generic.txt for more information on the *PRN section
#
#Code PRN SLOT Units System Description
#------------------------- ---- ------------ ---------------- ----------------
------------------------------------------
Hope this helps.
Cheers,
joel
I am not getting the error now. Operator error I guess.
Thanks everyone. Now to do some logging. It is sooo hot today.
Bill
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
Can you please re-post the updated calc_pids.txt file...
Thanks and Cheers,
Joe