Does anyone have a supported vehicle list for EFILive V6?
Is there a supported vehicle list for V6?
Does anyone have a supported vehicle list for EFILive V6?
If it is OBD-II with VPW protocol (i.e. 1997-2007 GM), then there's a good chance you can log from it.
Is V6 scan only or is it flash and scan?
I got the impression it would flash too, that is what it was originally bought for.
Tom,
V6 flashes also.
You can upgrade to V7 software (you will need to get a new cable registration license).
All the software is free.
You have FlashScan V1 that you run V6 on, right...?
Got it working with V7.5, so far at least, it does support the AT1 RS232 interface.
Now to see what I can do with it....
But on the V6 question, it flashes, but what vehicles? I can't find a list anywhere. I have the v7 scan license.
You won't be able to flash using the AT1 interface.Originally Posted by N0DIH
To flash, you need a flash+scan license, and an unused PCM license.
Flashable Vehicles: http://www.efilive.com/supvehicle.aspx
Mine is a AT1 V2, which means it will flash. Not to be confused with EFLive V2. It is the 2 way version..... I guess I will have to try!
Oh, I see.
EDIT: it won't work.
Last edited by joecar; June 26th, 2008 at 02:27 AM.
EFILive does not support reading or flashing any controllers through the AutoTap interface. You must use a FlashScan interface for flashing.
Regards
Paul
Before asking for help, please read this.
So, what you are saying, is the V7.x version of EFILive is the FIRST version to ever FLASH a PCM?
I was under the impression V5 and up could flash with the EFILive V1 or V2, or the AutoTap AT1/AT123, V2 and later or ATU.
Posting Permissions
Reply With Quote