Results 1 to 2 of 2

Thread: tuning carb intake and elbow

  1. #1
    Lifetime Member minytrker's Avatar
    Join Date
    Jan 2006
    Posts
    1,332

    Default tuning carb intake and elbow

    I tuned a ls1 with a carb intake, elbow and 90tb the other day. Everything was normal except the timing. It would only go to .52 and stop. I have never seen a car use so little of the timing table. Is it because of where the map sensor was installed? It was right under the elbow in the side of the intake. Anyone else tuned these before or is that normal?

  2. #2
    Lifetime Member
    Join Date
    Jul 2005
    Posts
    702

    Default

    how high did MAP go? that's the most significant factor in cylinder airmass

Similar Threads

  1. 98 s10 converted to carb but still has 4l60
    By minytrker in forum Vortec V6/V8 Specific
    Replies: 8
    Last Post: August 30th, 2007, 01:39 PM
  2. Need help tuning gmpp intake w/ accel 1150cfm tb
    By wadesns in forum Gen III V8 Specific
    Replies: 4
    Last Post: July 13th, 2007, 04:25 AM
  3. Trying to use 4L60-E with 4-barrel carb
    By towline_5 in forum 4speed RWD/FWD Transmission Tuning (incl T42)
    Replies: 3
    Last Post: March 22nd, 2007, 07:33 AM
  4. Tuning a LSX intake?
    By Redline Motorsports in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: September 26th, 2005, 01:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •