Hi, I had a memory issue see this thread http://forum.efilive.com/showthread.php?t=8297
and send and received back my V2 , with Firmware 2.05.17 and Bootblock 2.05.08, Efilive explorer connect no problem , and upload from 1 ecm to my laptop no problem.

Now during the first 1-2 minutes the V2 is power on the keypads keys F3,up arrow,ok,down arrow don't work at all except if I press on one of those key with a lot of pressure ( I mean a lot ) then it start working then sometime pressing normally the arrow keys will make it jump 2 line at the time.

I try with V2 to pc only , V2 to car only , upgrade Firmware to 2.05.17 but no change.

Thanks
Modpcm