The PID selection for the E38 seems somewhat limited compared to what was available for my C5.
Can someone post up a PID selection so I can compare? Perhaps I'm not using the right PCM serial #.
The PID selection for the E38 seems somewhat limited compared to what was available for my C5.
Can someone post up a PID selection so I can compare? Perhaps I'm not using the right PCM serial #.
How many do you have to select from? Off the top of my head I would have thought a couple of hundred would show. Certainly all the main PID's you would need for tuning are there.
Is there a specific thing you are after that your C5 had?
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
I don't have the option to select any PIDs under "Air" or "O2". SO I can't log MAF, DYNAIR. Can't see if the O2s are switching.
I don't know what I'm doing wrong. I had a good understanding of how things worked with my C5 PCM and V1.
Last edited by johnsZ06; July 7th, 2008 at 02:05 PM.
Change the 'System' drop down list to show all, currently it is only showing DMA PID's for the E38.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
Switched to "All" and the list is exatly the same.
The only PID categories which show anything available are "E38", "Performance", and "External".
When I select "Default Imperial PID" list, "All", you can see what PIDs are valid.
And why does it say I have 22 PIDs selected when it clearly shows 4.
BTW, this is the rest of the above selection after I scrolled down.
Did you try to force a PID revalidation?
Connect scantool to ECM then Shift+F2.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.