Results 1 to 3 of 3

Thread: Dynamometer Newbie Questions???

  1. #1
    Lifetime Member GAMEOVER's Avatar
    Join Date
    Aug 2008
    Posts
    1,304

    Default Dynamometer Newbie Questions???

    Can someone explain this:

    1,200 HP measurement capacity and 650 HP worth of Loading capacity.....

    Thanks
    2008 2WD Ext.Cab Silverado 1500 6.0 V-MAX E38(L76) & T42(4L70E) MAF Only CL Corvette Servo AFE CAI INNOVATIVE LM-2 WBO2

    FLASHSCAN V2 & AUTOCAL

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Maybe, off the top of my head:

    it measures upto 1200HP (i.e. engine output), and it provides load upto 650HP (i.e. against engine output to hold rpm steady)...

    if that makes any sense.

    We're you able to find a controller...?

  3. #3
    Lifetime Member GAMEOVER's Avatar
    Join Date
    Aug 2008
    Posts
    1,304

    Default

    No Joe, I haven't found one yet....
    I'm gonna have to save up for a new one!
    I have everything but the Control Box. Dyno has been sitting on my Car Hauler for the last month or so... As far as I can tell it has less that 10 hours of use and about 200 miles run on it... I had an electrician come over and go thru the whole Dyno and so far

    It was bought new in 2001, Original owner died and company went bankrupt and dyno was stored for the last 6-7 years until it was auctioned off.....It's dirty and paint is a little faded but oh well...
    Last edited by GAMEOVER; December 25th, 2009 at 12:18 PM.
    2008 2WD Ext.Cab Silverado 1500 6.0 V-MAX E38(L76) & T42(4L70E) MAF Only CL Corvette Servo AFE CAI INNOVATIVE LM-2 WBO2

    FLASHSCAN V2 & AUTOCAL

Similar Threads

  1. Newbie with MAF questions
    By Johnyhotrod in forum Gen III V8 Specific
    Replies: 4
    Last Post: May 13th, 2009, 10:12 PM
  2. Newbie Questions
    By TBMSport in forum Gen IV V8 Specific
    Replies: 0
    Last Post: May 5th, 2009, 07:12 PM
  3. Newbie here with a log and a few questions
    By MattysTA in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: April 15th, 2008, 12:56 PM
  4. newbie questions
    By RUTAN TA in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: June 12th, 2006, 03:21 PM
  5. Newbie questions.
    By 12sec.5.3 in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: March 27th, 2006, 11:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •