Can't display more than 99,000 frames

[XLR8NSS]

Hey guys

When I log the truck it's usually on the ride to/from work and the logs are usually around 150K frames. When I open the logs to view they are cut off at 99,000 frames in the scantool. Are there any settings to change so I can view past 99K frames in the scantool?

Thanks in advance

[Blacky]

Hey guys

When I log the truck it's usually on the ride to/from work and the logs are usually around 150K frames. When I open the logs to view they are cut off at 99,000 frames in the scantool. Are there any settings to change so I can view past 99K frames in the scantool?

Thanks in advance

Menu: Edit->Properties->Logging->Frames(x1000)
i.e. Set to 200 for 200,000 frames

Regards
Paul

[XLR8NSS]

Hi Paul

That setting was already set to 1000. I set it to 200 just now and it still only shows 99,000 frames if I do Zoom All.

I have 7.5.4 build 64.

Thanks

[XLR8NSS]

One thing I noticed the other day while logging was that if I look at the scanner while it's logging past the 99,000 frame cutoff it displays the number of frames fine and keeps going. As soon as I hit zoom all after saving it reverts to the 99,000 cutoff.

[Blacky]

One thing I noticed the other day while logging was that if I look at the scanner while it's logging past the 99,000 frame cutoff it displays the number of frames fine and keeps going. As soon as I hit zoom all after saving it reverts to the 99,000 cutoff.

The minimum zoom limit is probably being hit. The rest of the data is off of the right end of the chart. Try scrolling the chart using the scroll bar to see the rest of the data.

Regards
Paul

[XLR8NSS]

Ok, I know for a fact I tried that in the past. It seems to be working now!!

Anyway to reset the zoom feature to actually zoom all?

Thanks Paul

[Blacky]

Ok, I know for a fact I tried that in the past. It seems to be working now!!

Anyway to reset the zoom feature to actually zoom all?

Thanks Paul

Its just a value in the software that is set to 0.01, I guess I could set it to 0.001 to give 10 times more zoom-out.

Note, depending on how wide your window is will depend on how many frames you can zoom-out to display.

It will be different in version 8, there are no zoom restrictions. Plus it is much faster to re-plot the charts.

Regards
Paul