anyone have a problem when doing a reflash of the PCM with the change engine oil light coming on? I have reflahsed my 99 and 01 and both after the flash change engine light came on.
anyone have a problem when doing a reflash of the PCM with the change engine oil light coming on? I have reflahsed my 99 and 01 and both after the flash change engine light came on.
the only time that has happened to me was during an OS upgrade. Reset the light and all was well.
key on, engine off, floor it 4 times to clear it.
2001 Camaro SS
EFILive Custom OS3
I was just making sure i wasnt going crazy. I know they were getting close to oil change just didnt think it was that close LOL
Has been noted a few times now, strange, we are 'supposed' to be resetting them after a full flash....will look into it.
If anyone wants to do us a BIG favour, can they please send me a tun file after a flash with the light on and one with the light off after the reset.
I will double check what my bench PCM's do.
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
I've put quite a few miles on mine (2 oil changes and more than 20 flashes) and have yet to see the change oil light. Usually, I see it by 3500 miles or so when I haven't flashed the pcm (spirited driving plays a factor). It's now been close to 5000 miles and no light.Originally Posted by GMPX
It will only occur after a full flash.Originally Posted by SSpdDmon
Cheers,
Ross
I no longer monitor the forum, please either post your question or create a support ticket.
I had the same problem a couple of times.Originally Posted by 87gmc
Bill
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune