Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Fan settings E38

  1. #1
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Question Fan settings E38

    Is there a way to set the fans lower on the E38 to something below the 192 shown on the table? Table G0901


    Elmer
    2014 Corvette Convertible, Torch Red, A6, Z51, 3LT, NPP Exhaust



  2. #2
    EFILive Reseller ringram's Avatar
    Join Date
    Oct 2005
    Posts
    1,411

    Default

    Did you do the fan patch? Then you can.
    You might need to have efiv2 plugged in to enable the feature I cant remember.
    But there is a patch to lower the temps in the table.
    Get EFILive in europe (http://www.efilive.eu).
    2007 Escalade ESV L92 6.2L VVT.
    2014 VF SV LS3 Maloo.

  3. #3
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default

    searching for fan patch

    thanks

  4. #4
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default

    I must not be in the circle for this. I guess I wait until it is part of the auto update process.

    Thanks
    2014 Corvette Convertible, Torch Red, A6, Z51, 3LT, NPP Exhaust



  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    The Fan patches have been out for sometime, but we are hearing from people that in the latest version they are not displaying correctly.
    You can find the patch within the Folder "Operating System Patches".

    Cheers,
    Ross
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #6

    Default

    OK. Maybe this explains why on two cars this last week it didn't work. Using the latest sofware. Now what?

    Howard

    www.redline-motorsports.net

    1-954-703-5560

    2006 ZO6 895/866 with APS TT
    2010 SSRS Camaro HTR-900TT (798/801)
    2011 HTR-850R Camaro
    2012 ZL1 Auto (10.33@135 MPH) Video Here!

  7. #7
    Member JAY4SPEED's Avatar
    Join Date
    Mar 2007
    Posts
    88

    Default

    I've had the same issue this week with the E38. I set B9904 to applied, performed a full reflash, reread the tune back out and I still have 192 as the min fan setting. Did I miss a step? I rechecked B9904 and it is still applied.

    Jay

  8. #8
    Lifetime Member izaks's Avatar
    Join Date
    Aug 2003
    Posts
    352

    Default

    There is a problem with the fan patch from build 64 on.
    Paul and Ross are aware of the problem
    2011 VE SSV 419 + CAM + Whipple 2.9FF SC + PPV front struts + Bilstein rear shocks + 6L90E with single piece carbon fiber prop

  9. #9

    Default

    Is this a difficult issue to fix?

    www.redline-motorsports.net

    1-954-703-5560

    2006 ZO6 895/866 with APS TT
    2010 SSRS Camaro HTR-900TT (798/801)
    2011 HTR-850R Camaro
    2012 ZL1 Auto (10.33@135 MPH) Video Here!

  10. #10
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default

    Can the activation of these "patches" be made to be part of the auto update process? Having to add patches to update the software seems a little bohemian to me.


    Elmer

Page 1 of 2 12 LastLast

Similar Threads

  1. DFCO settings
    By harascho in forum Tuning For Economy
    Replies: 5
    Last Post: March 11th, 2011, 04:07 PM
  2. Confused on IFR settings
    By samh_08 in forum General (Petrol, Gas, Ethanol)
    Replies: 25
    Last Post: June 17th, 2009, 02:47 AM
  3. Injector settings?
    By Aloicious in forum Gen III V8 Specific
    Replies: 36
    Last Post: April 14th, 2008, 02:54 PM
  4. Need help with IAC settings
    By SV8346 in forum General (Petrol, Gas, Ethanol)
    Replies: 15
    Last Post: February 1st, 2008, 07:55 PM
  5. PE vs RPM settings
    By ahall1 in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: August 11th, 2005, 11:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •