LS1 engine on another car

[odd boy]

What steeps need to be done in case a LS1 engine is installed on another car like ford, Nissan? The case I have here is that, a friend has 94 ZX, he put LS1 engine and has removed the un-necessary plugs, but the engine doesn't start, some one said you need to cancel the security of the PCM, then every thing will be okay, can some explain this, please

[5.7ute]

Set G0102 to none. What happens is without the correct signal from the BCM the vehicle will not be able to start.

[johnv]

Even if the VATs is still on , the engine should still fire and run for a few seconds then stop, so maybe he has other wireing or setup issues

[hquick]

Even if the VATs is still on , the engine should still fire and run for a few seconds then stop, so maybe he has other wireing or setup issues

Correct. We had this issue after the LS1 PCM upgrade. Vats needed to be disabled but the truck still fires...just dies immediately.
Check wiring and codes.

[odd boy]

I will check and get back to u

[odd boy]

Set G0102 to none. What happens is without the correct signal from the BCM the vehicle will not be able to start.

u mean {G1201} Anti Theft Configuration

[Biggsy]

u mean {G1201} Anti Theft Configuration

Yes, you are right. Set that to "none"

Cheers,

[odd boy]

thanks guys