URGENT - WARNING for V7.3 USERS - (updated Sep 09 2005)
One of the custom operating systems has fault that will cause a PCM to enter an infinite reset loop. Once the PCM is in that loop it will become unresponsive and can not be reflashed.
The operating system is 02040003.tun.
DO NOT FULL-FLASH OPERATING SYSTEM 02040003.tun INTO ANY PCM
A corrected verison of 02040003.tun is available from this page:
http://www.efilive.com/downloads/downloads_os.html
Regards
Paul
The following calibration tables may be corrupted by EFILive.
These tables define the limits to which the adaptive shift algorithms can adjust the High and Low transmission line pressures.Code:D1101 Low Pressure Adjust 1-2 Shift D1102 Low Pressure Adjust 2-3 Shift D1103 Low Pressure Adjust 3-4 Shift D1104 High Pressure Adjust 1-2 Shift D1105 High Pressure Adjust 2-3 Shift D1106 High Pressure Adjust 3-4 Shift D1107 High Pressure Adjust
EFILive treats the values in these tables incorrectly resulting in incorrect limits being set. The result of having incorrect values in these tables is that adaptive shift learning will be limited to the incorrectly altered values in these tables.
There is currently no workaround. A new version of EFILive will be released shortly to fix the problem. Once the fix is available, you should check (and update) the values in any of the above tables with known, good, stock calibrations.
Regards
Paul
I just noticed my values are not right. When are you going to have the fix in Paul?
Thanks,
Bill
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
Lol, Im 4 days behind on finding all this stuff. I just emailed Paul about the tables this morning.. Looks like he is a couple of days ahead of me..
"If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."
It will be available today!
Paul
That's fast. It is going to be a patch 001 to 7.3?Originally Posted by Blacky
Bill
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
V7.3 pre-release 004.That's fast. It is going to be a patch 001 to 7.3?
Bill
We keep holding off the final delivery of V7.3 in the hopes that at least some 98 support can be included. But that may not happen.
Paul
Is the release 004 out yet? I did not see it.
Bill
2011 Camaro 2SS/RS L99 RJT
CAI, Inc. Cold Air Induction;ADM Scoop
Rx Catch Can;Rx Breather;Roto-Fab Washer Container
VMax Ported RJT Throttle Body
XSPower Headers and XSPower 3" Exhaust System
Elite Engineering Tunnel Brace,
Gorilla Wheel Lock System;
Tinted Windows 35%;EFILive Tune
It went out to the beta testers last night.
I need to fix one or two minor issues that were found, then I'll post it up here in a few hours: http://www.efilive.com/downloads/downloads_730.html
Regards
Paul
:cry:
I'd rather be blown, bored... AND stroked!
Now: 447 CID (Corvette 427) , ATI Procharger D-1SC Supercharger
Posting Permissions
Reply With Quote