Results 1 to 5 of 5

Thread: Rough Idle after Plugs

  1. #1
    Junior Member
    Join Date
    Mar 2008
    Posts
    20

    Default Rough Idle after Plugs

    Can you take a look at my tune. I have been having some rough idle issues while in park. Thanks for any help. Here is my tune.
    Attached Files Attached Files

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    What is your plug gap...?
    Is your coolant level staying constant...?

  3. #3
    Junior Member
    Join Date
    Mar 2008
    Posts
    20

    Default

    the plug gap is set at .40. The coolant is fine now that i have done the z06 cam swap. I replaced the water pump seals and it doesnt leak anymore. I upped the idle 75 rpm's or so, and it seemed to help. Just wondering why it sounded like a 110lsa cam or such when at 550 rpm idle. Checked all the TB and intake tube, MAF and everything looks good. Looked for any vaccum leaks as well.


    cory

  4. #4
    Lifetime Member jfpilla's Avatar
    Join Date
    Apr 2003
    Posts
    666

    Default

    Stock Z06 idle is 800 rpm.
    Did you get a double click on the plug wires to the coil packs?
    2003 red vert
    Mods:
    LS7 crate engine, wet sump, 24xx reluctor
    LPE 100mm MAF
    Vararam, cold air intake and bridge
    RPM Level 6/4L60e trans
    3.42 gears
    Yank SS3600
    1-7/8" AR headers
    Z06 exhaust
    470rwhp 437rwtq
    1/8th mi-1.526-60'-6.862-1/8th-@100.74mph

  5. #5

    Default

    may be O2 switch point {4105}

    from your tune, change to stock values
    Last edited by vxchev8; February 6th, 2010 at 04:19 PM.

Similar Threads

  1. Rough idle VY Commodore
    By Biggsy in forum General (Petrol, Gas, Ethanol)
    Replies: 51
    Last Post: July 22nd, 2012, 01:02 AM
  2. stock duramax rough idle
    By hutch in forum Duramax LLY
    Replies: 9
    Last Post: April 19th, 2011, 03:56 PM
  3. rough idle at start up with cam
    By achidotcom in forum Vortec V6/V8 Specific
    Replies: 9
    Last Post: April 19th, 2008, 03:12 PM
  4. Rough idle
    By aaronr in forum Gen III V8 Specific
    Replies: 18
    Last Post: December 28th, 2007, 05:08 PM
  5. Rough Idle Trim issues after VE-MAF Tuning
    By Chalky in forum General (Petrol, Gas, Ethanol)
    Replies: 22
    Last Post: July 30th, 2006, 06:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •