Hi... I ran into an interesting problem.
When I got my E38 ECU ,T42 TCM and the BCM together on a bench harness I realized that I was not able to see the BCM on the CAN bus. Are there any tricks to read and modify a BCM with EFI live?
Harald
Hi... I ran into an interesting problem.
When I got my E38 ECU ,T42 TCM and the BCM together on a bench harness I realized that I was not able to see the BCM on the CAN bus. Are there any tricks to read and modify a BCM with EFI live?
Harald
If nobody has done it before, somebody has to do it....
1997 Tahoe 2dr 4WD
2002 Alfa Romeo Sportswagon 2.0 JTD
1982 Deutz Intrac 2004A
2003 friesian Horse " Henry"
EFILive will not communicate with the BCM controller, only the ECM and TCM.
Andrew
EFILive Crew
are there any plans for efilive to start supporting bcm communication
would be nice to be able to clear codes (air bag)
The EFILive V7 scantool can already clear codes on all modules on the bus...
go Edit->Properties->Advanced and checkmark Check/Clear DTCs for All Modules, click Ok;
then go Info->Clear DTC's for All Listed Modules.
the omly module that is listed is the pcm not the bcm.thats usng v1 havent tried v2 on the ls1 yet
~Erik~
2013 Sonic RS Manual - 1.4L I4T E78, tuned, turbo mods, etc.
2008 TrailBlazer SS 3SS AWD Summit White - LS2 E67/T42, bolt ons, suspension, etc.
2002 Chevy TrailBlazer LT 4X4 Summit White - 4.2L I6 P10, lifted, wheels, etc.
Also note: on 1998-2002 F-car the BCM is not on the serial bus.
2001 commodore