v2 won't save new setup

[smithf71]

Hoping someone can help. I made a serial cable for my V2 to my LM-2 earlier
today. I followed the instructions for setting up the sensor in the v2 and when I went to complete the save by pressing ok, the v2 came back with cannot save try formating config system. It will read the o2 sensor, but as soon as I unplug the V2 it reverts. Any Idea's

[Blacky]

Did you try reformatting the Config file system?

You must have the V8.1 software installed on your PC. You can download that software here:
http://www.efilive.com/download.aspx#download1b

You can format the Config file system by running the EFILive Explorer program, while FlashScan is connected via the USB cable.

Start the EFILive Explorer program using the Windows start menu option: Start->All Programs->EFILive->V8.1->EFILive Explorer

Once the program is running, select the [Config] tab page and click on the [Format] button.

After you have formatted the config file system, FlashScan will be able to save your settings.

Regards
Paul

[smithf71]

Thanks,