Results 1 to 4 of 4

Thread: 9 sec. C5 Blower Car - No Air Filter - Help?

  1. #1
    Junior Member
    Join Date
    Mar 2008
    Posts
    44

    Default 9 sec. C5 Blower Car - No Air Filter - Help?

    My 9 sec. C5, 427 Blower Car running 18 lbs. of boost normally runs (Drag Races) with an air filter. Third gear is a bit sluggish (1/8th to 1320'), and AIT builds dramatically during that portion of the run! My tuner (Dan Bills Owner of FLP) feels the blower becomes very inefficiant during that part of the run trying to "suck" more air than the filter allows (efficiently) so he wants me to run WITHOUT that air filter restriction.

    Have any of you "Blower" guys Raced without an air filter? if so what did that do to your AFR settings/readings???

    ANY INPUT WILL BE WELCOME!!!

    JR

  2. #2
    Junior Member
    Join Date
    Feb 2006
    Posts
    11

    Default

    We run without a filter on a F-body, You have to watch out for debris. I would blow out you engine compartment with compressed air. Before you try it. As for how lean it will go God only knows! I am sure it will pick up boost. Hopefully you are speed density tuned so AFR should be in check Make sure you watch your wideband.

    I recently fitted a larger air filter in the C5 kit with a F1 give me a call If you want details
    Brent 260-244-4808

  3. #3
    Junior Member
    Join Date
    Mar 2008
    Posts
    44

    Default

    Well I did it - Removed the air filter and with the help of Dan Bills at Finish line Performance coaching me to read plugs at the end of the drag strip and make some AFR adjustments I am running 9.44 @ 148 (about 1.5 tenths quicker). I went dead lean 850 - 2100 RPM at the hit of the throttle so I made some changes in those areas and ALL IS GOOD!!!

    JR

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Good job JR...

Similar Threads

  1. Heater blower quit working
    By 69camaro5speed in forum Gen III V8 Specific
    Replies: 1
    Last Post: November 8th, 2008, 01:09 PM
  2. Filter Sets
    By mr.prick in forum RoadRunner Real-Time PCM Emulator
    Replies: 4
    Last Post: August 17th, 2008, 07:17 AM
  3. Ideal Blower WOT AFR Curve
    By white01ss in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 3
    Last Post: April 30th, 2008, 08:14 AM
  4. Stupid blower belts...
    By wait4me in forum Lounge
    Replies: 15
    Last Post: September 16th, 2005, 09:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •