issue with new firmware

[odd boy]

Hi,

I've noticed two points since the installation of the latest firmware and BBL:

1. Some times after donating a credit to a pcm the attached picture happens and I need to unplug the device then plug it again to get every thing working fine.

2. I can read and flash while the scan tool is open but not running


thanks,

[TAQuickness]

On point 2, and the current infrastructure, the cable can only communicate to one software instance (i.e. Hapi, Scan Tool, or Tune Tool).

[odd boy]

On point 2, and the current infrastructure, the cable can only communicate to one software instance (i.e. Hapi, Scan Tool, or Tune Tool).

when the software is on (no connection between the device and the pc)