Results 1 to 10 of 124

Thread: E38 VVE Setup Guide

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Lifetime Member swingtan's Avatar
    Join Date
    Jul 2007
    Posts
    1,589

    Post E38 VVE Setup Guide

    Hi All,

    a little while ago I was taking to a couple of other tuners here in Australia about setting up to do your first VVE adjustments. While I know that those who have been working with EFILive for a few years would have managed to work things out fairly well, us "newbies" ( so to speak ), have a pretty steep learning curve. So after talking a bit I decided to put together a quick quick to help the new comers and maybe a few of the more experienced as well.

    Please note that this is aimed at the Holden range of vehicles with the E38 controller, but should work fine for the G8 over in the US. It's been looked over by a couple of guys and should be fairly correct, but if any one finds any discrepancies, let me know and I'll update as needed. It's certainly not a replacement for the doco supplied by EFILive, it just takes a step by step approach to setting up ready to do the work.

    Hope this is helpfull to some.


    Simon.

    EDIT: I just realised I should have stuck this in the "Tutorial" forum.... Mods please move if needed.


    EDIT:
    Quote Originally Posted by joecar View Post
    Attached Files Attached Files
    Last edited by joecar; May 11th, 2016 at 02:57 PM.

Similar Threads

  1. E38 / E67 VATS disable guide
    By GMPX in forum E37, E38 & E67 PFI ECM's
    Replies: 141
    Last Post: March 22nd, 2023, 12:35 PM
  2. Tuning Beginners Guide
    By NASABlue in forum Gen III V8 Specific
    Replies: 0
    Last Post: September 30th, 2009, 01:37 AM
  3. Beginners guide to tuning
    By ringram in forum Tutorials
    Replies: 26
    Last Post: June 17th, 2006, 09:46 PM
  4. Draft LC-1 Guide
    By 98WS6_JPM in forum General
    Replies: 4
    Last Post: May 12th, 2006, 01:53 AM
  5. PCM tuning guide
    By 2000ssnb in forum General (Petrol, Gas, Ethanol)
    Replies: 2
    Last Post: September 3rd, 2004, 04:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •