I ran across this thread http://forum.efilive.com/showthread....em+uego&page=3
But still stuck on the ben file.
Does anyone have a write up or some kind of instructions on how to get the UEGO to work on V2 so I can finally do an AutoVe?
AEM UEGO calc_pid Ben
I ran across this thread http://forum.efilive.com/showthread....em+uego&page=3
But still stuck on the ben file.
Does anyone have a write up or some kind of instructions on how to get the UEGO to work on V2 so I can finally do an AutoVe?
-Joshua
408 ECSB|244/248|WCCH 2.5 LSA|
FLT4|COS3 SD EFI Live|FTI 4200|4.30's|truetrac|
To Err is Human. To ARRR is Pirate.
calc_pids(AEM).txt
ben = afr/gm.afr
Excellent!
-Joshua
408 ECSB|244/248|WCCH 2.5 LSA|
FLT4|COS3 SD EFI Live|FTI 4200|4.30's|truetrac|
To Err is Human. To ARRR is Pirate.
See Josh, I told you some one had all ready done it
01 ECSB 1/2 ton 4x4 Forged 5.7 LS1 GMC
Custom KBracing front mounted, BW S480, intercooled turbo
I was close but I didn't have the Ben part in there.Originally Posted by kbracing96
See Josh, I told you some one had all ready done it
Thankfully Mr. Prick isn't one and was nice enough to post up.
-Joshua
408 ECSB|244/248|WCCH 2.5 LSA|
FLT4|COS3 SD EFI Live|FTI 4200|4.30's|truetrac|
To Err is Human. To ARRR is Pirate.
Posting Permissions
Reply With Quote
