Results 1 to 4 of 4

Thread: 8100 Vortech Tuning

  1. #1
    Lifetime Member MN C5's Avatar
    Join Date
    Mar 2005
    Posts
    376

    Default 8100 Vortech Tuning

    Will Flashscan work on a 8100 motor? its and 03. I know it logs fine but was wondering if anyone had programed a pcm with a 8100 motor

  2. #2
    EFILive Reseller wait4me's Avatar
    Join Date
    Aug 2004
    Posts
    1,348

    Default

    Yes it works. Ill send you some files when you are ready. I need to track down one table that makes the throttle hang... The tune is really nice, but the sticking throttle has me baffeled..... :(
    "If you can leave a black mark on the pavement, from the exit of one corner to the braking point of the next one, you have enough horsepower."

  3. #3
    Lifetime Member N0DIH's Avatar
    Join Date
    Jan 2006
    Posts
    467

    Default

    Throttle hang? Did you find out what caused it? I take it this one is a ETC engine?

    The reason I ask, is I am getting one to tune here in a few weeks. Not a modified engine, stock, just will get a CAI most likely.

    Quote Originally Posted by wait4me
    Yes it works. Ill send you some files when you are ready. I need to track down one table that makes the throttle hang... The tune is really nice, but the sticking throttle has me baffeled..... :(

  4. #4
    Member
    Join Date
    Feb 2007
    Posts
    61

    Default

    Quote Originally Posted by wait4me View Post
    Yes it works. Ill send you some files when you are ready. I need to track down one table that makes the throttle hang... The tune is really nice, but the sticking throttle has me baffeled..... :(
    Any update as to what this was?

Similar Threads

  1. 08 Silverado 5.3 Tuning, tuning-spark/pe mode/
    By hulm333 in forum Gen IV V8 Specific
    Replies: 1
    Last Post: November 16th, 2009, 03:44 PM
  2. Corvette C5 Vortech misfires
    By Hocky in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 5
    Last Post: August 25th, 2009, 12:18 PM
  3. Post in here what you would like to see in the Vortech support.
    By wait4me in forum Vortec V6/V8 Specific
    Replies: 8
    Last Post: October 15th, 2007, 03:19 PM
  4. Vortech SQ S-trim .bin file..........
    By FreddyG in forum Gen III V8 Specific
    Replies: 0
    Last Post: September 2nd, 2007, 04:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •