Results 1 to 3 of 3

Thread: What to put in IFR table with boost referenced fuel pressure?

  1. #1
    Lifetime Member
    Join Date
    Nov 2007
    Posts
    228

    Default What to put in IFR table with boost referenced fuel pressure?

    I am going to start tuning a S10 with a roots type blown LSX swap. It has a boost/vacuum referenced fuel system. I need to know what to put in the IFR table since it doesn't have to compesate for the fuel/vacuum any more. I am assuming that it will be a solid number based on the base fuel pressure vs. injector size. Not the normal scaled up IFR table. Is this correct? Any help would be great.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    That's correct, a single number for the whole IFR table...

    Engine running, disconnect boost/vacuum reference hose, measure pressure at fuel rail, then calculate:

    IFR = injector_rated_flowrate * sqrt(measured_rail_pressure / injector_rated_pressure)


    Remember to reconnect reference hose.


    More info: showthread.php?t=4821

  3. #3
    Lifetime Member
    Join Date
    Nov 2007
    Posts
    228

    Default

    Thanks again Joe.

Similar Threads

  1. Fuel Rail Pressure's relationship to fuel economy.
    By duramaximizer in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 28
    Last Post: February 28th, 2010, 12:18 PM
  2. LOW FUEL PRESSURE logging for low fuel pressure nirtous systems
    By WiseGuyZ06 in forum External A/D inputs
    Replies: 4
    Last Post: October 11th, 2007, 11:56 AM
  3. Boost pressure input and logging
    By diynoob in forum External A/D inputs
    Replies: 1
    Last Post: March 4th, 2007, 01:08 AM
  4. IFR Table and Boost
    By DrX in forum Forced Induction and Nitrous Oxide (N20)
    Replies: 1
    Last Post: February 22nd, 2006, 12:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •